JAMSI Online
Region: US
Sunday 20 September 2020 18:05:54 GMT
1251922
85484
514
1169
Music
Download
Comments
T :
the tap on the impact 😳
2020-09-20 18:29:23
2152
JeepLife Matt :
Can't say I've ever seen a tap on an impact before though.
2020-09-21 22:22:20
209
sidewayseightsix :
It was the tap in the drill that made my anxiety jump. 🤘🏼💕
2020-09-22 01:16:29
80
kris.j.k.2nd :
never in my life would I put my tap on the impact
2020-09-20 23:51:06
648
William Morgan :
10 uga dugas on the tap is just right 😏
2020-09-20 19:13:31
425
Brian Russell :
Literally yelled “NOOOOO” at my phone when the impact came up. That’s illegal
2020-09-23 22:42:21
224
charleston.cadillac :
I'm surprised at all the comments... "I would never have broken it" Guess some people don't work on mechanical things They just talk about it.....
2020-09-21 00:27:05
46
JAMSI Online :
Yes! It works on cast iron! Total time: <10 minutes
2020-09-20 18:10:18
35
Tita Tovenaar :
Nice job but that freaking tap man omygod my eyes 😩
2020-09-20 22:30:40
34
Jacob Hasting :
yOu PuT A TAp oN aN ImPAcT
2020-09-27 02:57:25
25
PJB :
Easy Peasy on the bench! A little harder on the car. And never use a drill with a tap!!
2020-09-20 19:44:41
19
Wrenchin_Ryno :
Welder has been my preferred way to remove manifold bolts. With engine in vehicle there isn't always room for a drill and easy out. 👍
2020-09-20 21:50:27
9
Nicholas Jones :
It was the blendtec reference for me...
2020-09-20 18:47:14
7
E :
@802garage
2020-09-27 15:42:57
7
Mr_T_86 :
My eyes lit up with tap in a impact😳 and process starting over in 3 2 1 😂
2020-09-21 21:38:57
7
Texas :
i do this. im the ONLY one that does it in my shop cause everyone else is scared and cant runn a welder. lol
2020-09-20 18:43:07
6
Pope Sellers :
Ever tried left hand drills? Let it sit and soak with some sorta penetrating oil over night, center punch the top of the bolt, then left hand drill.
2020-09-24 01:36:06
6
Chris :
I like the will it blend reference
2020-09-20 18:38:08
6
Wyatt Hall :
So I've been fighting a broken bolt with an easy out broke off in it. Bolt is a water pump mounting bolt on a 350 block. Any tips?
2020-09-20 21:37:47
6
Kyle Rhamy :
Good trick in the book, but you lost all credibility with the end there
2020-10-06 12:03:46
5
Joe :
A tap on an impact driver 😳😳. The next video will be extracting a broken tap from the hole 🥺
2020-09-29 00:58:20
5
user2583229443311 :
this all looked good until he used a hammer drill with a tap🤦🏻♂️
2020-09-29 04:56:00
5
Jackmerius tacktheritrix :
Im not taking advice from a man that taps holes with an impact🥱
2020-10-01 22:14:37
5
user1039474839382 :
it you could just use a drill press and left handed drill bits to back it out once you start drilling👍takes about 30 to 60 seconds
2020-10-04 16:59:54
5
Samuel Cherry :
i got to try this for the first time today and it worked the first try😁
2020-11-21 04:41:19
5
andrew :
Knowing my luck I’d weld the washer, stud and manifold all together
2020-09-20 21:02:31
5
Fer Nando :
Man if that tap snaps, it’s more of a pain to get it out than the bolt lol.
2020-09-23 15:59:22
5
Simon Wells :
first weld normally breaks. try a washer under the nut - it does less damage to the edge of the hole.
2020-10-03 10:00:48
5
ui4ina :
Высверливание в прошлом?
2020-10-17 02:04:59
4
Jay. :
This is a lot more fun when the head is attached the the block still in the engine bay. 😁😂😂
2020-09-20 20:31:44
4
taish378 :
タップは電動でやらない方がいいね
2020-09-28 22:22:10
3
Ntc Khaosai Imjai :
เจอพี่ไทย เชื่อมไปเคาะไป. เอาคีมร็อคบิดออกเลย
2020-09-23 10:01:15
3
Bye :
Đã từng lấy một con ốc 10 giá 2tr5
2020-09-28 18:15:55
3
jjj :
Por favor, jamás usen un impacto para, limpiar oh re_hacer una rosca, es mil veces mejor, hacerlo manualmente 🙏
2020-09-24 22:23:03
3
Mario Läte :
this is how i did it on my 5.3 Yukon, that had broken header bolts. in total of 6 broken bolts, it took me 57 nuts but i got it done, in situ. 😁
2020-11-08 12:14:35
3
MeerzzaaaT :
how many ugga duggas to clean threads?
2020-09-27 20:16:23
3
Dirt road duramax :
It would help even better to use the right style tap by hand. Just dip the tap in grease to trap the shavings and manually work it in with a wrench.
2020-09-20 18:22:17
3
Ben :
I uh, don't think that's how you use a tap
2020-09-20 18:41:06
3
user6248973152030 :
You obviously don’t know what you are doing a good wrench would have had it off before it was broke
2020-09-20 23:55:50
2
. :
No happier feeling then when a broken bolt is removed.
2020-09-23 20:16:17
2
█▓⃢⃢▓█▓( ꈍᴗꈍ)♡▓█▓⃢⃢▓█ :
สว่านบ่งเกลียวซ้าย แล้ว หยอด ไนโตเจนเหลว ไขออกได้ง่ายเหมือนกัน
2020-09-21 03:45:21
2
Ant5565 :
"don't breath this" thats a 10 year throw back !
2020-09-23 12:47:16
2
chevy_soldier707 :
I use tap on impact aswell u do it so many times u get the feeling down 100% if you never taped anything dont use impact 😁
2020-09-24 20:33:25
2
Cstenger93 :
Why use a tap with an impact ???????
2020-09-24 02:23:06
2
Niko Z :
Закручивать метчик гайковертом ,ну такое... можно второй видос сразу снять)
2020-10-29 19:45:04
2
Fraser Grigor :
@niamh.beattie the tap on the impact 😳
2020-09-27 15:30:16
2
Joe :
Mayhew pro 37316 order that for your air hammer works wonders with getting broken studs out while using your air hammer
2020-09-20 22:00:42
1
Zachery vergin :
Had me till you put the tap on the impact
2020-09-23 13:12:17
1
Sasha Sitov :
Экстрактор??Неее не слышал!
2020-10-26 23:03:12
1
➡️7cm=1m90♻️🌾 :
làm màu
2020-09-20 23:25:07
1
To see more videos from user @jamsionline, please go to the Tikwm
homepage.
