libertycustombuilders
Region: US
Saturday 24 December 2022 15:33:23 GMT
1202354
10932
250
732
Music
Download
Comments
scorpio :
use blue tape on the base, then glue, easy clean up
2022-12-24 18:07:01
70
Terrance :
if only the saw had presets for cutting crown on the flat 😂
2022-12-24 17:43:33
41
H and 50k others :
I like it. but you could also set angle at 31.6 and bevel at 33.9 and run the crown flat
2022-12-25 19:43:08
36
honeybadger36480 :
why not use crown stops? or make a crown jig for your saw?
2022-12-24 18:16:44
11
AlphaOffroad4x4 :
Why not just do it properly and compound mitre cut it flat on its back???
2022-12-25 04:30:22
18
Lee :
Great idea, Bud 👍
2023-01-29 07:20:53
2
Paul D1915 :
put a piece of masking tape first then the CA glue it will make removal significantly easier
2022-12-25 14:15:46
4
James Paul :
I jdraw a line on the miter saw, but your method works, great work. I do fine the negativity in the comments amusing from all the so called experts..
2022-12-30 09:32:09
2
GT :
Just use an old dewat with crown stops
2022-12-24 18:08:43
2
markyrowan :
you can drill, and tap holes to thread in the dewalt crown stops fairly simple and cheap just in case you're wondering
2022-12-25 05:37:34
2
Cuatro Venezuela Morillo :
Kreg makes a jig for this, you can buy it at Woodcraft
2023-03-23 04:51:31
2
Helder Silva :
Not on my saw 😂😂
2022-12-26 04:24:07
2
Miguel Patino :
Or you can change the degrees and cut it laying down
2022-12-25 18:58:53
1
detailhomeimprovements :
Pencil line across the top or bottom works great too
2022-12-24 20:49:19
1
Rikard Gloppen670 :
Just use a clamp
2022-12-25 01:23:38
3
louisapodaca63 :
dude!!¡ hell yea! will use!!
2022-12-24 20:19:06
1
Curtis Hack :
Omg! Brilliant! Wish I would have seen this a couple weeks ago. Bravo!
2022-12-24 20:03:45
1
Андрей :
скочи сначала надо клеить а патом клей
2022-12-25 07:41:01
3
Kendell Daley :
Crowd full of “why don’t you’s”???, I prefer this method when cutting crown, I really dig this idea! I appreciate your post my man!
2022-12-25 18:23:18
1
countdown1s0n :
This is glue. Strong stuff
2022-12-25 20:06:31
1
Rick :
Smart
2022-12-24 18:50:45
1
Parkdale Interiors Inc. :
A two foot 1x4 or piece of base works good too cuz then you see where the saw cuts thru the base and line the mark to blade easy
2022-12-26 17:12:41
1
it'sme it'sme, JB :
this can be handy on saws with shorter fence one 1 side! ty! great idea
2022-12-24 18:24:21
1
Anthony Gentile Photography :
I just use a clamp
2022-12-25 15:49:31
1
Uwe Paulus :
Wozu
2022-12-25 19:11:00
1
To see more videos from user @libertycustombuilders, please go to the Tikwm
homepage.
