@9chx__: #التميمي_ابوشنب👳🏻‍♂️ #التميمي_ابويزن❤️🥀 #نعي #حزين #كاطع_المياحي

ابـ✍⃕و يـৣزن الـ✍⃕ـ͢تـمـيمـৣـي

Open In TikTok:

Region: IQ

Wednesday 15 February 2023 18:26:09 GMT

1632493

76237

705

8259

Music

Download

No Watermark .mp4 (1.97MB) Watermark .mp4 (3.47MB) Music .mp3

Comments

مغلق للضروف 🙏 🥀 :

عليكم الله ادعولي لبويه لأن مريض كلش حالته تعبانه ومانعرف شنو السبب 🙏😭😭دعاء الغريب مستجاب 🤲

2023-02-17 13:52:56

17

حنطاويه :

منو اعرف هاي لمسيقه

2023-02-27 19:06:53

10

maha🌷 :

اوف اوف

2026-05-03 12:51:29

3

مهمومة وطبعي كتومة :

يا ابويه ارجع مو حيلي ضل مهدود بغيبتك يابعد رويحتي 💔😭

2023-02-15 18:35:36

68

ملكه الاحساس :

:عليمن صافنه شمالج شبابيج يروحي وبالحزن خلص شبابيج بسجن لاباب لافتحه لا شبابيج الصدى يرد وحشه الغربه عليه 🥺🥺🥺الله يرحم اهلي كلهم عمت عيني

2023-02-17 10:15:51

33

احمد احمد :

اوووووف يمه

2026-02-24 07:36:24

2

قمر :

عمت عيني عليك يا خويه صار ثمن تشهر ماسامعه صوتك 💔💔😭😭ولله كسرتني

2026-04-09 13:00:50

6

hdsshsiwijbsbsvsvshssgg :

اخخخخ اي والله 😢💔🥺😢💔😔

2023-02-17 16:24:08

11

حفيده" الأمام" ؏ــلي؏ :

اخخ اي والله 💔😭😭😭😭😭😭🥺

2023-02-17 12:16:53

15

ماردنا الموادع ويه الاحباب :

😭😭😭😭😭احوو ع كلبي

2024-12-26 09:59:01

7

جوهره :

اي والله بعدني محتاجكم

2023-02-16 23:10:06

5

Amani🖤. :

اوف

2023-02-15 22:00:52

4

مهند البصراوي :

اي يابويه فراكك صار سبوع ماسامع سولفكم 😭😭💔

2023-02-15 22:08:51

5

اني كحيلة سلف مالوك للغمان 😎M :

اووف يايمه 🥺💔

2023-02-16 04:41:50

5

أّمَيِّرةّ أّلَأّحٌزِّأّنِ أّل :

احسنت احسنت اخي النشر كل محتواك روووعه

2023-02-21 20:39:53

8

Zahra AlJanabiزهہرآء :

ياريت سبوع يمه مشتاقلج موت والله العظيم 😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭

2023-02-16 08:19:34

4

حيآة بلا آمل :

اي والله

2023-02-27 21:53:05

4

بصراويه وافتخر :

إي والله صدك 💔😭💔

2023-02-15 22:36:29

5

ابن احمد☀️ :

اوووووووووف 💔💔💔💔💔

2023-02-15 22:29:56

2

وجع. الزكريات 💔💔 :

يالله

2023-02-16 08:27:55

3

♕ﺣۦ۬۬ۦۛۛ٭ﻤؤدي♕ :

🖤:باجر يشـيـلون جـنـازتـي واصير اكـبـر عـزيز...💔😔

2023-02-16 22:59:17

4

🫡جوديـﮯ آلگوريـﮯ 🇰🇷🤟 :

🥺اخخخ اي والله صدك 😭😢

2023-02-16 18:06:02

3

(((. ☠️ابن الشايب ☠️))) :

الله 😭😭😭😭

2023-02-16 07:58:55

1

تمساح الابيض✌️🫵🩴 :

اي والله 💔🥹

2023-02-15 21:06:04

2

To see more videos from user @9chx__, please go to the Tikwm homepage.

Other Videos

My friend has found this rusty old cleaver on the steel waste. I really liked the unique look of it with the hook instead of a hole to hang it on the wall. As christmas holidays were just around to happen, I knew I had to pick a project that I have all the material ready in my shop, because everybody was in vacation. So i choose to restore this cleaver. The disassembling was done very quickly, so was the sandblasting. The original handle was held in place with the peened tang. I didn't really like the shape of the handle and I also didn't wanted to peen the handle again. Si I decided to make a more ergonomic nice looking handle. That's why I shortened the tang around 45mm and drilled three 5mm holes in it. That went very well as the tang wasn't hardened. Next I wanted to make it mirror polished. I startet with the belt sander to grind away all the pitting from the rust. Then it was time for hand sanding. I started with 120 grit, after all the scratches were gone from the belt sander I moved on with 240. Then 400, 1000 and 1200 at the end. I then had a fine enough surface to be able to mirror polish it on the cotton buffing wheel. It took quite some time to do that, but the end result came out absolutely amazing. Moving on to the handle. I decided to make a three part sandwich. I started by making a spacer out of smoked oak. Cut out the shape of the tang and then glue it on to a piece of pear tree wood. Then I was able to file the spacer to the same tapered thickness of the tang. After gluing the other side of the handle on and drilling the holes for the rivets through I could start to rough shape the handle with a rasp. I decided to make three screwable brass rivets. I applied some Loctite on the threads and tighten them together. After that I filed the slotted heads away, flush to the handle. Then it was time to give the handle a final sanding with 120, 240, 400 and 1000 grit and apply linseed oil for the final touch. And after sharpening this job was done completely. I really liked to work on this cleaver. Mirror poilishing was a lot of work and also the work on the handle was quite challenging, but I really liked the end result and I think it speaks for itself. I hope you like my work and the video.

My friend has found this rusty old cleaver on the steel waste. I really liked the unique look of it with the hook instead of a hole to hang it on the wall. As christmas holidays were just around to happen, I knew I had to pick a project that I have all the material ready in my shop, because everybody was in vacation. So i choose to restore this cleaver. The disassembling was done very quickly, so was the sandblasting. The original handle was held in place with the peened tang. I didn't really like the shape of the handle and I also didn't wanted to peen the handle again. Si I decided to make a more ergonomic nice looking handle. That's why I shortened the tang around 45mm and drilled three 5mm holes in it. That went very well as the tang wasn't hardened. Next I wanted to make it mirror polished. I startet with the belt sander to grind away all the pitting from the rust. Then it was time for hand sanding. I started with 120 grit, after all the scratches were gone from the belt sander I moved on with 240. Then 400, 1000 and 1200 at the end. I then had a fine enough surface to be able to mirror polish it on the cotton buffing wheel. It took quite some time to do that, but the end result came out absolutely amazing. Moving on to the handle. I decided to make a three part sandwich. I started by making a spacer out of smoked oak. Cut out the shape of the tang and then glue it on to a piece of pear tree wood. Then I was able to file the spacer to the same tapered thickness of the tang. After gluing the other side of the handle on and drilling the holes for the rivets through I could start to rough shape the handle with a rasp. I decided to make three screwable brass rivets. I applied some Loctite on the threads and tighten them together. After that I filed the slotted heads away, flush to the handle. Then it was time to give the handle a final sanding with 120, 240, 400 and 1000 grit and apply linseed oil for the final touch. And after sharpening this job was done completely. I really liked to work on this cleaver. Mirror poilishing was a lot of work and also the work on the handle was quite challenging, but I really liked the end result and I think it speaks for itself. I hope you like my work and the video.

It feels like a giant furnace outside. Luckily, I brought a portable fan.#diveblues #portablefan #handheldfan #turbofan #foldablefan

It feels like a giant furnace outside. Luckily, I brought a portable fan.#diveblues #portablefan #handheldfan #turbofan #foldablefan

#لعب #خبيتي_بوص #خبيتيات #ترند_السعودية #اكسبلورexplore

#لعب #خبيتي_بوص #خبيتيات #ترند_السعودية #اكسبلورexplore

"I'm at a ten" is four words and it has saved us from more two-day silences than anything else we've tried. the fifteen minutes isn't avoidance — it's the only way the real conversation survives. what's your number right before you say the thing you regret? 🤍

About

Robot
API

Legal

Privacy Policy