Cabin Dad
Region: US
Sunday 18 June 2023 15:43:32 GMT
1166
39
24
1
Music
Download
Comments
AJ :
you will need a double acting cylinder to be able to go both ways. and depending on pressure a pressure reducer?
2023-06-18 23:09:22
2
willie :
try putting an offset in your wheels from the center of the pivot to help your wheels turn into the direction that you are pulling it. Like a caster.
2023-06-21 20:06:12
2
Dman473 (Dman473) :
Should be ok. If you want it to run exactly like it does rn with the hydraulic oil flowing at full pressure after the valve use a power beyond log
2023-06-18 17:51:24
1
Tahoemountainman :
@Michael Williams
2023-06-18 19:19:43
1
Rabbit Recovery :
Open Center hydraulic valve fed by the unimogs hydro lines and a double acting ram. However this may just bend everything if you don’t make it strong
2023-06-18 21:00:33
1
LittleBaca92 :
if you have in out you could do a directional control solenoid with a needle valve to set the flow speed.
2023-06-21 19:52:34
1
Michael Williams :
If you are towing it, I wouldn't waste the time with hydraulics. Someone else mentioned self centering, I would go with that option.
2023-06-23 00:27:35
1
𝔖𝔭𝔲𝔡 ℑ𝔫𝔫𝔦𝔱 :
yes. it can be done. however.... you're making your life so much harder than you need to..
2023-06-29 21:58:50
1
To see more videos from user @cabin.dad, please go to the Tikwm
homepage.
