@rebecasawts: eu séria a rainha do baile, se chorar fosse um concurso.. #promdress#lyrics#tradução

Bebeca_sants

Open In TikTok:

Region: BR

Thursday 16 November 2023 00:56:18 GMT

52616

2232

5

134

Music

Download

No Watermark .mp4 (1.25MB) No Watermark(HD) .mp4 (12.47MB) Watermark .mp4 (1.33MB) Music .mp3

Comments

Star light :

aprontei essa música no trabalho foi um sincero desabafo

2025-03-25 04:34:37

0

𝐸𝓁𝓁𝓎 𝒿𝒾𝓈𝑜𝑜 𝑔𝒻'𝓈🤍! :

🙁

2025-01-13 03:03:03

0

☔↩️⚡🌴⛔ 🥁🦇🐍🦇🌜☂️🌞 :

@El Perro hm

2024-04-05 00:38:48

2

gab :

b

2024-04-04 03:14:42

1

To see more videos from user @rebecasawts, please go to the Tikwm homepage.

Other Videos

Así es 👍🏼

Así es 👍🏼

🖤 BlackorGreen 💚 Carbon Fiber Lamination Process 👌 ➖➖➖ This process is suitable for manual lamination. For more complex items, methods like autoclave or infusion can be used ⤵️ 1. Preparation of the Base: Clean the surface of the base (metal, plastic, or other structure) from dirt, dust, grease, and old coatings. 2. Preparation of Carbon Fiber Fabric: Cut the carbon fabric into the necessary pieces according to the size and shape of the base. 3. Fixing the Carbon Fiber Fabric: Apply a thin layer of 3M #77 adhesive to secure the fabric and trim any excess. 4. Preparation of Epoxy Resin: Mix the resin with the hardener according to the manufacturer's instructions. 5. Application of Adhesion Layer: Cover the base with a thin and even layer of epoxy resin. 6. Laying the Carbon Fiber Fabric: Carefully place the first layer of carbon fabric onto the base. 7. Impregnation of the Fabric: Apply an additional layer of epoxy resin over the fabric. 8. Adding Layers (if necessary): For multi-layer coverage, repeat the process of laying the fabric and applying resin. 9. Air Removal and Fixation: Use a vacuum bag to remove excess air and create pressure, ensuring the fabric adheres closely to the base. 10. Drying and Curing: Leave the part for the time specified in the resin instructions, at the recommended temperature. 11. Lacquering: Thoroughly prepare the surface for applying 2-3 layers of lacquer. 12. Sanding and Polishing: After complete curing, sand the surface to remove irregularities or excess lacquer. ➖➖➖ #blackorgreentextil #carbonfiber #carbonfibre

🖤 BlackorGreen 💚 Carbon Fiber Lamination Process 👌 ➖➖➖ This process is suitable for manual lamination. For more complex items, methods like autoclave or infusion can be used ⤵️ 1. Preparation of the Base: Clean the surface of the base (metal, plastic, or other structure) from dirt, dust, grease, and old coatings. 2. Preparation of Carbon Fiber Fabric: Cut the carbon fabric into the necessary pieces according to the size and shape of the base. 3. Fixing the Carbon Fiber Fabric: Apply a thin layer of 3M #77 adhesive to secure the fabric and trim any excess. 4. Preparation of Epoxy Resin: Mix the resin with the hardener according to the manufacturer's instructions. 5. Application of Adhesion Layer: Cover the base with a thin and even layer of epoxy resin. 6. Laying the Carbon Fiber Fabric: Carefully place the first layer of carbon fabric onto the base. 7. Impregnation of the Fabric: Apply an additional layer of epoxy resin over the fabric. 8. Adding Layers (if necessary): For multi-layer coverage, repeat the process of laying the fabric and applying resin. 9. Air Removal and Fixation: Use a vacuum bag to remove excess air and create pressure, ensuring the fabric adheres closely to the base. 10. Drying and Curing: Leave the part for the time specified in the resin instructions, at the recommended temperature. 11. Lacquering: Thoroughly prepare the surface for applying 2-3 layers of lacquer. 12. Sanding and Polishing: After complete curing, sand the surface to remove irregularities or excess lacquer. ➖➖➖ #blackorgreentextil #carbonfiber #carbonfibre

Cs u so fine #blowthisup #dance #xyzabc #fypシ゚viral @brielle

Cs u so fine #blowthisup #dance #xyzabc #fypシ゚viral @brielle

Así es 🙌🏼 #fypシ

Así es 🙌🏼 #fypシ

About

Robot

Legal

Privacy Policy