Flying Wrenches Automotive
Region: US
Monday 01 January 2024 20:53:34 GMT
751730
36302
422
1085
Music
Download
Comments
_vetrix11 :
7.3 probably wouldn’t blow a cardboard gasket
2024-01-03 00:53:41
524
user544674322 :
7.3 don’t make enough power to blow heads😂😂
2024-01-01 21:05:03
104
Killtwan :
6.4s aren’t notorious for head gaskets tho
2024-01-02 01:55:15
85
Cameron Davis :
Could you drill and tap two more holes without hitting a coolant passage or something
2024-01-01 22:36:27
45
TH Cattle & Hay :
6.7s are bad about cracking/warping the head.
2024-01-02 17:56:02
2
Izaic Postma :
Cummins over here taking 60lbs of boost with 2 head bolts over stepping each cylinder
2024-01-02 17:01:13
75
Mikel Peak :
What will cause water in the oil on a 7.3? First I had oil in my water. Replaced intercooler fix that but now watering my oil.
2024-01-02 03:15:30
3
rrfarmboy :
Hate to tell you but my 6.7 just blew a head gasket and there were 3 more in the shop for it
2024-01-01 22:18:06
6
Brett Hyde :
What's your opinion on the fix for the Time Bomb CP4 Fuel pump?
2024-01-03 01:43:20
5
tanner marriott :
I love how everyone talks about the 7.3 being slow but it made more power than the 5.9 and you never hear about that😂
2024-01-02 18:11:18
10
Steven D Owen Jr. :
Nah 6.0 failures were because of the EGR coolers failing, and guys thinking they need to dump ALL of the diesel into the cylinders all the time just to create smoke
2024-01-02 15:54:45
10
jesco :
don't race diesels....they are for work. a tuned 3.5 gas will blow your doors off with an f150 10 speed
2024-01-02 16:19:27
5
tombob415 :
Because the 7.3 never made any power stock from the factory. I think it was like 230 hp six
2024-01-02 06:30:29
6
Honest Bones :
Never blew my 6.0 head gasket after I put a air to oil cooler on it
2024-01-01 23:20:48
30
That 85 street tractor :
6.7 7.3 on 🔝
2024-01-02 01:57:19
6
WorldwideTaco :
Could it be my 7.3 stock makes 10HP???😂😂😂
2024-01-01 22:19:53
7
stevelanham433 :
I enjoy your videos very much. You're very intelligent and knowledgeable
2024-01-01 21:58:22
5
supraman3.0 :
7.3 is international, not part of the rest of the junk.
2024-01-03 13:32:40
2
Mason Christianson :
but the 6.0 did have the 14mm head bolts which did give it pretty similar clamping force to a 7.3, just the 6.0 makes double the hp
2024-01-03 10:51:59
2
Troy Bissell :
6.0 once you use better head studs and torque properly they are good to go. they were not done right at factory.
2024-01-02 06:04:47
2
American Gunslinger :
Is the 7.3l the better of all of them?
2024-01-02 00:13:43
3
Brandacarburetorman :
Headbolts don’t hold down the rockers on a 6.7 either.
2024-01-01 22:11:24
2
sheldon_schmidt :
48psi boost on my 7.3. ... still holding and 280k miles.👌
2024-01-02 02:56:45
2
Tom_Dietrich_1 :
The real reason 6.0 blew head gaskets was from the turbos sticking. Used to see them push 50psi occasionally with a stuck turbo.
2024-01-02 02:04:18
3
To see more videos from user @flyingwrenchesauto, please go to the Tikwm
homepage.
