@jade.sweeney_: ad STEP BY STEP GUIDE TO PUTTING UP THE £18 PANELLING KIT As requested 🥰 here is a slowed down version of the step by step Process of putting up the £18 panelling kit I got from @bandq_uk . This is part 1 and part 2 will be the wall light hack coming in a couple of days Here are a few extra tips I couldn’t get in the voiceover, inspired by the wall panelling guide from @bandq_uk! To work out even spacing I find drawing it out easiest! Roughly lay up against your wall how many panels you want. And then sketch it. Each panel strip is 10cm. So for me wall width was 310cm. I had 7 panels (10cm each) = 70cm. On my drawing this left me with 6 spaces between each panel. So 310-70= 240cm . 240cm/6 spaces = 40cm even gap between each panel piece. You will need to trim down the horizontal MDF to fit the width of your wall. Get a mitre box for this ( £7.99) if you aren’t experienced with cutting wood (like me 😆) this will keep you cut totally straight! Make sure you wipe down any excess glue or caulk immediately with a damp cloth. It’s much easier to wipe off than it is sand down when it’s dried!! It is so easy to do though and I put the whole kit up in a few hours! And then another few hours to prep and then paint! Such a good cost effective and easy way of transforming a boring wall in your home! I hope this gives anyone the confidence to give it a go, if I can do it in my fluffy slippers anyone can 😂 Shopping list below I got it all from @bandq_uk. £18 panelling kit - I needed x2 my wall was 3.1m Dado rail No more nails Caulk Wood filler Sand paper A cloth to wipe down A hand saw A mitre box Wood primer Level Tape measure Paint of your choice love Jade xxx #BandQHome #BandQIt #diypanellingproject #diypanelling #panelling #panellingwalls #panellingguide #bedroom #bedroompanelling #affordabledecor

jade.sweeney_

Open In TikTok:

Region: GB

Sunday 14 January 2024 07:21:00 GMT