@builtbybec: Step by Step 👇🏻 - Cut the top to size 22” x 13” x 3/4” I used some scrap I had left but plywood would be great for this project. I used my new @smithologytools blade in 40 Tooth so I wouldn’t get any tear out. - Glue the trim pieces to the bottom of the top piece. They are 13” x 1.5” x 3/4” (2) and 20.5” x 1.5” x 3/4” (2). Optional: cut out a handle with your jigsaw on the shorter side pieces. - Cut the legs to size. 11.5” x 8.75” x 3/4”. - Grab some 3/8” threaded inserts from @homedepot and connecting bolts. I don’t know why they use mm for measurements but the connecting bolts are 1/4” x 50mm. - On the legs drill a 3/8” hole on both sides, the hole should be 3/4” down from the top and centered. - On the sides of the top drill a 1/4” hole all the way through on all 4 corners. The hole should be 2 1/4” in from the side and 1 1/2” down from the top. - Finish up with your favorite stain. I used @minwaxusa simply white. - Put the threaded inserts in the legs, then slide the connecting bolts through the top into the threaded inserts and tighten. Love this little folding laptop desk, it makes it so I can work anywhere. Do you work from home?