WeWrench
Region: US
Thursday 16 May 2024 17:06:14 GMT
3299236
124550
2449
25195
Music
Download
Comments
Callmeskippy :
vice grips my brother. they work a dream
2024-05-16 19:19:09
905
lockeynut :
if it's being changed, tighten it till it snaps. dont loosen it. thank me later
2024-05-16 23:48:12
561
user1729856497735 :
I take a prybar and prying the swaybar up as much as possible then i uggadugga the nut. If that doesnt work i just use an insex in the bolt and an open wrench to loosen it. Works fine for me.
2024-08-02 11:31:20
0
Pete :
torches. every time. don't even bother trying to take the nut off. (rust belt machanic)
2024-05-16 21:28:19
85
Jason :
torches, can't be tight if it's liquid
2024-05-16 23:55:55
120
Hans Gruber :
Do you budget monthly for tool carts?
2024-05-16 18:34:22
101
JV Garcia 59:1-17 :
wouldn't habe that problem with dewalt 🤣🤣🤣🤣🤣🤣🤣
2024-05-16 18:28:18
4
D.C.M.X :
🤣🤣🤣 All you need is a pair of grips 😂😂😂
2024-07-08 11:26:46
1
user1 :
Was just going through this today 😂
2024-07-31 23:36:24
1
Syn :
some manufacturers make stabilizer links that will fit a wrench. idk why other manufacturers won't do that. such a waste of time.
2024-05-16 23:49:37
11
SKI :
Get some parrot pliers!!!! You’ll thank me!!
2024-05-16 19:12:39
9
Avery Farrell :
Parrot nose vise grips made for thus exact situation
2024-05-16 21:34:21
2
Diesel___1 :
Put a hex bit with a socket in the middle and get a ratcheting wrench
2024-05-16 19:56:04
13
John Nor168 :
Honestly made that more difficult than it needed to be. You can fit a wrench on the back side then you can impact the bolt off..
2024-05-16 18:43:36
4
Joshtaylor513 :
Just use vice grips and a ratchet
2024-05-16 22:58:37
1
user8222122505193 :
I remember my first day.
2024-05-16 23:56:49
2
shoplife_127 :
they make proper pliers for that my boy 🤣💯
2024-05-16 21:47:33
1
brad williams :
So much easier to just grind them off
2024-05-16 21:30:21
1
ThatGrayStang🤙 :
Vice grip behind the nut trust me saved me many times
2024-05-17 01:04:37
33
smoke19794 :
nailed it
2024-06-24 13:03:24
1
Paul Mcdowell975 :
got mine to do and I know this would be me😂
2024-05-19 02:26:36
2
mohamede kasem :
thanks
2024-06-20 02:07:24
1
McSwiggins :
I usually go straight for the angle grinder/cutoff wheel combo when they're getting replaced.
2024-05-17 00:34:44
10
Detroit_R32 :
All that stress 👀 your heart must love you 😅😅 ✊🏼
2024-05-23 02:18:11
2
Creagan Maclaren :
the fact you ACTUALY Tipped your cart over for this 👀😅
2024-06-11 00:20:56
51
To see more videos from user @wewrench, please go to the Tikwm
homepage.
