Enginebuild Car
Region: US
Wednesday 04 September 2024 13:02:41 GMT
33853
335
34
5
Music
Download
Comments
Robert J R ❌ 666 :
The older motors wer made to be fixed up an keep going its when u build for power is when it dont last
2024-09-07 00:35:21
1
Derrick Hinish645 :
We have a farmall 560d that has a head on it with a similar repair still on the tractor running been years with no problems
2024-09-04 14:10:37
3
alvinestep :
I fixed a couple Fords in a couple Chevrolets where they had cracked like at in them. I just took a torch up and heated it and got some cast-iron welding rods and welded them and re-ground it 💯💯
2024-09-04 19:13:47
2
Joey Peterson :
I think you need some stitching to hold the crack from expanding.
2024-09-04 18:08:06
1
Brad Estes :
We used to do repairs just like that in Dodgers the only thing different that we didn’t see you do was maybe putting sealer on the repair pins when we installed them
2024-09-04 22:35:17
0
Vic :
I worked in commercial aviation for 30 years. Unfortunately, I don’t think that’s gonna last without some sort of weld repair. The constant heat cycles is going to pull that apart.
2024-09-04 23:11:58
0
danielstephens376 :
Drill and Tapp and put screws in close together used small balpeen hammer and worked on it it's not an easy task to do
2024-09-05 01:45:49
0
Gandreen d :
Hey guys, looks good. The lock n stitch is really a good repair. You guys did a great job. I wouldn’t worry at all. I would feel very confident in it. Good job.
2024-09-07 12:17:41
0
old-dave :
I've actually attempted this same repair, but unfortunately the crack ran so deep into the port I was unable to get to the end of it. if you can get the end of the crack the repair should be good.
2024-09-04 16:59:15
0
Jc Cooper951 :
love your content I work as heavy equipment field technician so I like to learn all aspects of our industry
2024-09-05 18:05:56
0
darryl :
if it goes 100 mi. it can go thousands of miles, if driven within reason. i have done a few hail Mary passes. Hats off to ya's.Saw nothing but professionalism, Great work. Nice to see heart!
2024-09-07 08:55:03
0
paulcampbell4475 :
I trust you !
2024-09-04 17:17:17
0
alvinestep :
Good job on that that sealant it should hold what y’all did. I think you’re doing a good job.💯
2024-09-04 19:15:04
0
paulcampbell4475 :
if it fails I will still pay
2024-09-04 17:18:08
0
For The Insane :
I did my Desoto hemi head that was cracked from the the exhaust seat to the intake and down into the bowl. After stitching it worked fine. I think yours will too. I would also use the Goodson sealant
2024-09-04 17:32:43
0
michaelgillliam :
it'll definitely work until it don't.
2024-09-05 02:59:03
0
jim :
👍👍👍👍❤️
2024-09-04 13:44:59
0
Papatim 16 :
warm it up a little and drop it in
2024-09-04 19:35:27
0
scraptruck :
Why don't people grind the shrapnel off the end of drivers and chisles?
2024-09-04 23:17:25
0
Jim :
Time to replace that tool.. or get a good face shield
2024-09-04 18:48:33
0
Gerry Atric :
Just cut of the handle of the hammer.
2024-09-04 18:28:08
0
E3 :
OSHA is interested in the face of that valve seat driver
2024-09-05 00:31:36
0
donnyjustice0 :
Why not Braze it?
2024-09-05 04:18:17
0
Scot Selfridge :
Just do it
2024-09-05 13:25:12
0
Jeff Laughlin :
Like that serdi 😎
2024-09-04 15:53:30
1
Milt777 :
Why not watch how a Pakistan do welding on blocks as they don’t have the tools but do sone really amazing work for what they got as to save a head or block just a video that had me watching do the im
2024-10-26 06:54:06
0
user7305131375558 :
I work at a machine shop for 8 years and did several repairs exactly like that and never had an engine come back for any warranty work. Only difference is the type of sealant. We used JB weld.
2024-09-05 01:16:30
0
user2930441057240 :
I think they’ll have good service out of it unless it gets ran really hot
2024-09-04 23:43:35
0
✝️ Mitchel ✝️ :
I’m not a machinist but why don’t they use solder in cracks?
2024-09-04 14:41:25
0
To see more videos from user @enginebuild_car, please go to the Tikwm
homepage.
