@britainbennett: PVC Christmas Trees🎄 Wanted to line our driveway with something bright and festive, and these pvc trees were the perfect addition! Here’s how we did it: 1. Cut (3) pvc pipes into 6ft sections 2. Cut (3) scrap pvc into 4 inch sections 3. Add 4 screws barely through top of 2 inch end cap + 3 small holes into the sides 4. Insert a coupling piece into a 1/2 inch PEX pipe, thread 3 cross connectors, connect ends to create a circle 5. Add legs (4inch pvc) into the bottom of each of the cross connectors + drill small hole into the middle 6. Distribute legs into equal thirds, insert long pvc into cross connectors to create tripod + tape in place 7. Place end cap on top and drill screws into the side holes + in the middle of cross connectors 8. Zip tie end of lights to the base, wrap around a screw at the top, bring back down and zip tie about 2 inches apart from start and repeat around entire tree #christmas #christmasdecor #christmastree #christmasdecorating #christmasdiy #christmashome

Britain Bennett

Open In TikTok:

Region: US

Thursday 21 November 2024 19:28:57 GMT