@livinglarsonhome: Save this and see the full details below 👇 Here’s what you’ll need. Cut List: * (4) Plywood pieces: 15” x 17.5” * (4) 2x2 legs: 18” each (ripped from a 2x4 - or just buy a 2x2) * (8) 1x2 supports: length depends on your box width, 4 of these will go across the top of the side supports. * Trim pieces: cut to fit with 45° angles Assembly: 1. Make pocket holes in the plywood using a Kreg jig. 2. Attach the plywood to the 2x2 legs with 1 ¼” pocket hole screws, placing 1x2 boards underneath for alignment. 3. Add supports 6” from the bottom and secure with nails or screws. 4. Attach the top trim pieces with mitered edges for a finished look. 5. Once assembled, place a few pieces of plywood across the supports to hold your tree stand 6. Paint or stain—I used leftover red paint and let my kids help 🤪 The kids were SO excited about this Christmas Tree box and loved seeing the finished product… it made decorating our tree even more special 🎄 Save this post to try this project and let me know if you build your own!! #diyhome #diychristmas #christmastree #Christmasideas #christmastreeideas #christmasbox #christmasboxes #diymom #diywithkids #handmadechristmas #handmadechristmasdecorations
