Mini Metal Mechanical Models
Region: US
Sunday 01 December 2024 22:50:41 GMT
140813
1200
96
46
Music
Download
Comments
Paul Lefever168 :
One is thou, other is ten thou.
2024-12-01 23:02:24
53
user7306972632853 :
Why would you use that type of indicator?
2024-12-02 17:04:30
1
BlueCollarSmokeBBQ :
Part slipped in the chuck. Finish looks like your insert was dull causing excessive tool pressure
2025-01-08 00:10:58
0
Cassandra Klinepeter :
2 different gradation scales, one is .001, the other .0001 (or metric equivalent) if the one moving more is an order of magnitude more precise then they're clearly moving the same
2024-12-02 00:53:59
8
mark barnes200 :
leave you indicators on there long enough it will be running true
2024-12-02 01:09:55
19
Baumerman64 :
you have the spindle going the wrong way
2024-12-01 23:23:49
8
Pedro Martinez49916 :
pause it and it's on a 3way chuck NOT accurate 🤔
2024-12-02 03:23:53
2
jessie :
a skin cut of about .020 from the point of the less moving indicator will fix the out of round material.
2025-01-17 03:55:28
1
Bert :
One is true the other egg shape due to bore / wasn’t turned after it was bored piece relieved itself after bored
2025-01-07 00:59:58
1
mjdegroot58 :
Not good.
2024-12-01 23:03:22
1
chrisjohnsonbaugh :
to much runout
2024-12-02 02:02:35
0
Bobby Wilmoth :
The first indicator on the left is at the end of travel
2024-12-02 03:55:06
0
mike R :
they turned 1 side, and then turned it around, and turned the other side, with out indicating the 2 side 😁
2024-12-05 10:36:08
0
Robbie :
look at the tip mark on the left indicator. I'd bet it's probably close to being bottomed out on the travel
2025-01-09 02:07:52
0
tsia55 :
If before you turned face and diameter at the same time, put one watch on the face, to center the face and then OK
2024-12-02 08:41:02
0
Fliberty biberty :
How u do dat lol
2024-12-06 02:10:02
0
To see more videos from user @svanfon, please go to the Tikwm
homepage.
