Your Favorite Contractor
Region: US
Wednesday 18 December 2024 23:01:46 GMT
1130652
3045
149
89
Music
Download
Comments
Gareth Pritchard379 :
Scars across 3 fingers after the board kicked, now I'm extremely careful and let the wife do it.
2024-12-20 01:28:04
392
JBLUE :
What's the purpose of cutting it like that
2024-12-18 23:08:44
29
Ngb0925 :
No carpenter is scared of that cut
2024-12-18 23:28:58
362
tone :
Would personally just use a skill saw
2024-12-19 21:14:39
94
307farmer :
safety goggles 😂
2024-12-18 23:52:05
9
Marshall :
Never pull the board backwards, lift it and move it forward.
2024-12-18 23:45:34
28
asiepasie0 :
There are lovely kickback movies on TikTok to see how this could go…
2024-12-19 20:39:36
27
Nick.G :
only scared of cutting a 2 inch piece of material on a chop saw
2025-03-01 23:33:16
1
BenCoirArt :
Couple more times and you’ll learn where to drop the board so you don’t have to back cut.
2024-12-20 01:42:51
8
Vic :
What’s the reason for this?
2025-02-11 17:58:21
0
Dj AAron_DET :
Why would you need a table saw for that cut
2024-12-19 23:42:36
7
John Schilling :
raise the blade into it. and put a start mark on the fence so you don't go backwards. you will eventually get a kickback doing it his way. But it is only a contractor saw with little hp.
2024-12-19 07:41:47
8
George the Greek :
Scribe cuts without the fence are my enemy 😂 Just one kickback creates trauma
2024-12-19 21:50:38
6
Loughner :
If you are scared of the blade, that’s when you will be hurt
2024-12-19 16:12:40
3
bergsthebuilder :
What’re you scared of exactly?
2025-01-22 03:59:44
0
Bocephus :
If this cut scares you. Then don't become a carpenter. I'm a concrete guy and done cuts more sketchy than this. lol
2024-12-20 01:58:23
1
Brendon Weekley :
Not scary at all just a normal cut. Always respect the table saw though and NEVER let fingers go behind the blade.
2024-12-31 00:12:44
0
cam :
I would but I’ve got a plunge saw for that cut you know right tool for the job and that
2024-12-19 16:31:38
2
xphilx1 :
Intelligent not scared
2024-12-22 13:39:16
1
Sebastián son of Thomas :
blade a little high but eazy beazy😁
2024-12-18 23:05:40
3
René :
Seen it before, done it before.By the way its called in dutch invalwerk and is very common to do.
2024-12-19 15:39:07
2
orange33 :
I usually but the wood and then rotate the blade up and then u move the wood. think first then act
2024-12-19 10:43:00
2
tambet :
do it under an angle
2024-12-19 10:26:12
1
Beat guy :
Why. do it all the time.
2024-12-19 03:27:53
1
DopeyMikey :
have to do most without a fence because of the walls being so far out of square
2024-12-28 23:26:50
1
To see more videos from user @your_favorite_contractor, please go to the Tikwm
homepage.
