those push fit need tightening too. there not locked up
put a decorators cap on . or a 1/2 bsp cap on the male to stop it .
drain boiler .
plenty of options.
2024-12-29 09:43:13
0
bigthighsi :
If you don’t have the decorators cap, try putting a 5p piece under the TRV so it pushes the pin down further
2024-12-28 13:21:30
30
user3813464885401 :
Plumber needed 👍
2024-12-28 19:25:52
0
Luke Felstead :
Yes call a plumber!
2024-12-28 14:39:07
2
LG :
Yeah, get a plumber
2024-12-30 00:24:17
0
wayne :
hi put a 1/2 cap end
2024-12-29 21:26:55
1
Jimbo86 :
Get a 1/2inch cap for it
2024-12-28 15:40:38
0
Dog :
Buy a cap and cap it off where it’s screws in
2024-12-28 17:03:21
1
niallo :
1/2 372
2024-12-28 23:26:08
1
LAYTS :
Try to cap that end off use a 15mm compression blanking cap couple quid from toolstation
2024-12-28 16:26:52
0
Fire :
Call a plumber 🙈
2024-12-28 14:56:32
1
Jack Somerville :
Google…
2024-12-29 12:14:55
0
Z :
Call a plumber
2024-12-29 12:27:39
1
user1061466580849 :
Not now you’ve taken the rad off , don’t take your thermostatic part off water will go everywhere
2024-12-28 14:15:07
1
Bailey Boo :
That’s a sensor so when temperature drops the valve opens. What happened to the radiator. You will need a plumber to solder a proper cap on as pressure will just cause it to leak
2024-12-29 00:29:14
0
ry :
Buy a 1/2 inch cap end with the rubber and fit it to the end the waters coming out of, problem solved 👍🏻
2024-12-28 16:04:23
1
Don’t be suspicious 😉 :
Call a plumber and pay them to fix it for you
2024-12-28 14:12:17
2
Jole :
does it not go further than the snowflake? there's sometimes a 0 even further than that?
2024-12-28 21:13:42
1
dj :
Filling loop cap or brass cap. DO NOT UNSCREW THAT HEAD it will shoot the rest of the pressure out.
2024-12-28 11:28:21
4
Running-My-Race 🏴 :
u can buy a cap end for the end of it. it'll be a 15mm brass female fitting or u can take the TRV cap off and put a. lank on there
2024-12-28 21:28:03
1
Jonnyb1066 :
5 pence piece under the thermostat
2024-12-28 15:01:36
4
To see more videos from user @abbicalx, please go to the Tikwm
homepage.