carfuhrer
Region: US
Friday 03 January 2025 22:55:40 GMT
48207
605
81
58
Music
Download
Comments
@Jake_h82 :
oil pressure sensor is easy to swap,
2025-01-04 01:01:41
12
cadence2325 :
You can reach it from the back of the manifold. Save a couple hours
2025-01-03 23:51:11
41
Midwestbiker77 :
O ring on the oil pickup tube.
2025-01-04 01:07:04
9
D. New :
25 mins tops. still gud video for the ppl that was wondering why I charge 150 😆
2025-01-04 01:25:00
3
Jonathon Elmore :
probably have low oil pressure lol
2025-01-04 01:07:00
2
yamakami_tahoe :
Right angle needle nose pliers to pull back the booster line connector, 1-1/16” deep socket, universal, 6” extension. Done.
2025-01-04 05:33:02
3
El Guanaco :
Bro, honestly, I gave you a like because of all you had to remove just to swap that sensor. I used to wrench, I hated it after 10 years. Props to all who are still in the business for the love of cars
2025-01-05 07:05:49
1
wickedreaper27 :
manual check oil pressure if good swap sensor if bad look at oil pick up tube o ring if there is no metallic flake
2025-01-04 00:40:34
3
budc64 :
Oil pressure sensor probly , change sensor and there’s also a small filter that sits underneath sensor that get plugged with oil carbon, got to love Active Fuel Management
2025-01-04 01:05:17
1
Jays-Auto-rebuilds :
note if you catch in time 9/10 oil pressure sensor but in my case 9/10 pressure sensor on my 2009 Escalade ext and 10/10 was the O ring on oil pickup tube. if you have all wheel drive it's more time.
2025-01-04 01:37:47
5
DanP310 :
can replace it without removing intake
2025-01-04 14:42:27
1
BuddhaBass1987 :
removed so much that didn't have to be removed that's a 5 minute job at best
2025-01-04 17:01:12
2
Bruce Hocks :
You didn’t need to pull the intake but good thorough work you did.
2025-01-04 01:27:29
1
stancedout :
bro in and out in like 20 min tops 30..no need to remove it all also a mechanic here 🥺
2025-01-04 17:43:58
1
Big Bo$$ :
yo lo hice en un GMC sierra 5.3 sin hacer tanto trabajo 🤭🤭
2025-01-09 01:11:11
1
999 world :
I wouldn’t pull the intake 🤦🏻
2025-01-04 05:03:27
1
Terry H Plunkett :
Replace the oil sensor
2025-01-05 00:07:07
1
dnttrip831 :
wht is it that you need to change please help mi out
2025-01-24 21:32:05
0
Cuazz_901 :
Tengo el mismo problema en mi Suburban 2008
2026-05-11 18:03:13
1
texasedition4.8 :
No need to remove intake literally takes 10 minutes use a couple extensions and a swivel with socket
2025-02-12 17:15:25
0
dnttrip831 :
i have a ford explorer 2012 and tell mi that message while ddiving and it turns of ive took it to alot of people already and no one can seen to find the problem
2025-01-24 21:31:34
0
onlyoneking :
can that cause a p0011 code
2025-10-23 19:30:31
0
Fausto Yanes :
yo lo quite sin remover nada😂😂😂
2025-01-09 13:02:12
0
ocieltorres6 :
no sé quita todo eso para quitar el sensor
2025-01-09 07:21:30
0
Miguel.Angel.Mendoza :
para cambiar ese sensor no nesesitas kitar todo eso es más yo cambie el mio de una yukon denali ..y me kerian cobrar 400 y yo solo gaste lo ke me costó en auto zone
2025-01-16 01:22:15
0
To see more videos from user @mobilemechanic333, please go to the Tikwm
homepage.
