Scott DIY
Region: GB
Wednesday 05 February 2025 13:41:30 GMT
53383
1566
82
15
Music
Download
Comments
Chachoo18 :
Can you find a local hire where you could take your wood And joint it there?
2025-02-05 13:55:06
3
Brittonic :
You can joint wood on your thicknesser, look up “jointing sled” on you tube. Or joint it with a hand jointing plane, or table saw sled, all 3 of these can give you your first square edge 👍🏻
2025-02-06 08:44:41
2
dawesy27 :
Prior to sending through your planer pack it up to stop it rocking so it’s solid
2025-02-05 19:29:24
1
Daaron :
thicknesses first then just run a edge with a track saw once done that pass it thru your table saw to get the width 👍
2025-02-06 18:14:40
0
kirwan_woodworks :
just grab an old Stanley no 5 and do a straight edge with that. then you can skip plane the faces on the dewalt. it'll be a great result as long as board is not crazy warped to start with
2025-02-05 19:10:54
1
jeffy55 :
I had a garage full of gear. I was sick to death of trying to dig it out every time I needed something so got shot of most of it. You need a decent workshop in reality.
2025-02-05 16:42:23
1
Harold Barrett :
Plane them flat and run a track saw on them, I bought my second CNC last year 😭
2025-02-05 19:00:50
1
Bryan :
I don’t have a jointer I use the track saw of use a straight edge trick on the table saw
2025-02-05 15:02:54
1
user6397674985969 :
I need a table saw and can't afford that atm 😭
2025-02-05 14:38:37
1
Adamski :
Need? Or want? We all know 😂😂 ❤️
2025-02-05 17:52:25
0
jordy van zuidland :
dewalt has a flipover jointer and plainer
2025-02-05 16:24:21
1
Hugh Jardon :
It’s because it’s fun
2025-02-06 07:54:49
0
Geralt z Temu :
serch Triton, small and 300 -400£
2025-02-08 08:39:23
0
McEnroe Carpentry & Joinery :
And people think we’re to expensive 😂
2025-02-06 14:38:51
0
woodbutcher :
try local auctions sometimes
2025-02-05 19:58:29
1
Joseph Lenihan :
wait till U 3 phase generator gives up
2025-02-05 18:15:33
0
unconditionallove204 :
But end product are fantastic
2025-02-06 00:24:34
0
El Pablo :
Simons class.
2025-02-05 15:58:43
1
stevenbasnett895 :
Been a chippy for nearly 30 years, I got taught with hand tools, now I have that many tools it’s unreal 👍
2025-02-21 18:59:47
0
Norphea Rasmey :
✨✨✨
2025-02-10 14:47:59
0
LB :
Get an old jointing plane and do it by hand. Much more satisfying @Eoin Reardon will tell you
2025-02-05 14:23:39
1
Gentlematt :
Make a jointing jig for the table saw 👍
2025-02-05 14:02:30
1
Mossy :
Get your self a track saw job done
2025-02-06 20:44:41
0
Daniel_fairlie :
Most expensive trade by a mile
2025-02-05 13:45:51
82
Bigtuna :
most expensive, most skilled, ask any site manager when they need to solve a problem, who they turn to?
2025-02-05 19:47:41
27
Garry Hirst :
Imagine if you were a tradesman getting all that pinched outta your van
2025-02-05 15:41:58
9
ol88 :
I work at a family run carpentry shop in stoke, we can machine it up for you 👍🏼
2025-02-05 16:55:01
4
wingnut101 :
sell the thicknesser and buy a jointer thicknesser
2025-02-06 06:55:52
2
Mwdfit :
You don’t need a jointer, I have one but lots of ways to joint a board to 90
2025-02-05 19:22:53
2
CptSharpe :
Thought I’d build my own outdoor furniture, would be loads cheaper….£1200 in tools later 🙄
2025-02-06 13:27:53
1
user8117697961800 :
Always known this as a surface planner, not a jointer 🤔
2025-02-06 20:49:18
1
Alan B66 :
Get a combination machine thicknesser underneath, surface planner on the top (jointer) They use same set of cutters for both jobs. used one for 40 years
2025-02-05 19:52:06
1
Tic Tic Tic :
Im addicted to buying tools.
2025-02-20 19:34:09
1
jacob m :
joiners need more tools than anyone 😂
2025-03-20 23:24:24
1
Runza :
Haha I was thinking thicknesser as you started talking, expensive, I have the dewalt one.
2025-02-05 14:20:25
1
Scott Builds :
Totally the most expensive trade / hobby .
2025-02-05 15:08:28
1
user4p682jpowj :
Can you run them through the thicknesser to flatten one side, then the other so you have 2 parallel then use the table saw to square it?
2025-02-05 17:25:05
1
deerpark timber :
butt the two boards together & run a track saw up the joint, that will straighten them for you 👍
2025-02-05 17:52:13
1
996_turbo_s :
I've a carpenter for 16 years and never needed a thicknesser
2025-02-05 17:32:07
1
gav23 :
I've set up my router table to joint planks for furniture making, you just need to make a step fence look on YouTube
2025-03-01 10:29:09
0
jamesfox6063 :
tools fair enough, timber prices are absolutely nuts now
2025-02-11 11:21:30
0
JGwoodworking :
combination machine. I have 5 operation combination machine. Table saw,jointer,thicknesser, spindle moulder and drill
2025-02-10 06:16:13
0
Bob Joe :
sounds like you need to build a workshop my man....
2025-02-06 22:59:21
0
l1am096 :
Table saw combined with a fence?
2025-02-06 09:40:40
0
Lorand Veres :
Pretty much depends on the projects, but honestly the amount of tools is almost never enough.
2025-02-05 23:33:56
0
To see more videos from user @scott_diy, please go to the Tikwm
homepage.
