Everyday Prototype
Region: CA
Tuesday 11 February 2025 17:12:16 GMT
739758
42149
600
2820
Music
Download
Comments
GeekySteve :
Or you can leave a void of .2 mm and bridge over. That's a lot simpler.
2025-02-12 01:53:08
1903
Assakir Ghafar :
what 3d are you using sir?
2025-02-12 01:57:34
1
BD649 :
I just microwave the magnets before I put them in
2025-02-12 15:42:04
1044
Rilz :
Couldnt you just put masking tape on the magnet
2025-02-12 01:31:01
282
Azhar Kaiju :
i just add glue over the magnet resume printing... but ithink your method got better result
2025-02-11 19:21:15
61
Carn_Flash :
or you could just attach the magnet to the build plate while printing then slot it in while it's still warm. (put painters tape on the up side to help with adhesion)
2025-02-16 03:33:50
2
KD :
Why not just set your magnet on the heated bed while you wait… then it wont be cold when it’s time to add it
2025-02-12 16:48:44
1
James 雷天龙 :
So simply, yet so effective! 😮
2025-02-27 19:37:48
1
Atticus Finch839 :
Great idea. Also learnt you can preselect pause points!
2025-02-12 01:06:49
33
beastmaster1972 :
What slicer are you using that you can add a pause so easy. I have tried adding magnets and as soon as my print head goes over it the magnet jumps to the print head.
2025-02-12 13:17:48
2
Daniel Vlcek :
what if it runs out of battery?
2025-02-12 12:38:34
1
fargeløs ferge :
Are your ski holders 3D printed? Are you happy with them? Are they available?
2025-02-13 07:42:28
1
That guy :
I like it, Picasso. Gotta do this for the fridge magnets...
2025-02-12 20:06:10
1
lexs :
I'm new to 3D printing haven't bought one yet but I've been wanting to know how do people get magnets inside 3D prints and you have nailed it for me
2025-02-13 21:34:18
1
Lil_daddy :
Couldn’t you just put the magnet on the bed so it’s the same temp?
2025-02-12 13:04:39
1
Alex :
I usually just put some glue stick on the magnet, although painters tape seems like a good option too
2025-02-12 15:16:19
3
Jondalorian :
Very smart idea. Nicely done. 😁
2025-02-26 16:50:37
1
TicStoc :
Did you print the ski holders on the wall in your garage? Or is the STL from that?
2025-02-12 23:14:59
1
Veitsikauppa.fi :
have you tried leaving the magnet to warm up on build plate?
2025-02-12 07:09:13
1
Reck :
Blue painters tape 🍻
2025-02-18 23:46:26
1
ethanprimmer :
Masking tape on the megnet ?
2025-02-12 04:50:48
43
jakeolson82 :
Is this Pedro Pascal narrating??
2025-02-12 18:21:43
35
Sam :
could you put the magnet on the print bed to warm while the hangers being printed then insert the warm magnet in the project?
2025-02-11 22:41:54
6
P :
or... hear me out. let it run. it's going to lay more layers on top of that. so you will never see it. and the walls around the magnet create strength.... 🤔
2025-02-12 10:43:45
50
Wakoko :
I place masking tape
2025-02-12 16:45:30
13
To see more videos from user @everydayprototype, please go to the Tikwm
homepage.
