Aaron - 802 Garage
Region: US
Saturday 22 March 2025 02:50:00 GMT
863168
16397
585
232
Music
Download
Comments
user845511665913 :
project farm voice
2025-03-24 01:42:11
1
pollemies :
use an wrench
2025-03-22 08:09:51
840
Johnny bramich :
Some people shouldnât have never been Introduced to impacts đ¤Ļââī¸đ ..
2025-03-22 07:49:20
1621
Otso :
saw the impact, knew that it wouldnt come outđđđ
2025-03-22 11:34:28
530
Thomas Hedehus :
Wtf you usin impact?! Use a wrench! Slowly back and forth, with rust loosener!
2025-03-23 08:37:59
137
BrokenPromises đ¨đĻ :
The problem is not the welding or the oil itâs the use of an impact this should be breaker bar only
2025-03-22 07:21:52
426
jo_vanman17 :
use a wrench not an inpact
2025-03-22 10:46:38
66
đšđđđđđđđđđđđđđđ :
use a wratchet đ
2025-03-22 10:29:52
51
Bucking Adventures :
Use a wrench and get it moving
2025-03-22 03:05:28
28
Mohammed Shahzad530 :
never use gun
2025-03-25 01:36:55
0
Jack Heffernan :
đThis is gas
2025-03-23 22:06:03
0
Dan H. :
Better if you don't use the impact use a wrench and ease it out rather than blasting with the impact more prone to snaping.
2025-03-22 03:10:05
21
TyâClark :
Impacts are love hate They can save you hours of work but they can easily cause you hours of work đđđ
2025-03-22 20:33:18
8
andy shubert :
use a damn wrench! slow steady pressure going back and forth and it'll work
2025-03-23 19:27:28
0
lost in wales :
Put the impact away đ
2025-03-22 10:28:32
21
bigjoner69 :
Wire wheel it first, washer under the nut, let it cool, penetrating oil, work it by hand
2025-03-24 19:52:26
1
user6973059908096 :
Real life is not like the old innerwebs.
2025-03-22 03:07:25
14
itssimpintime :
problem is the impact mate, once you get it moving a little youre past the hard part. itll be out with lots of patience and penetrant. back n forth all the way out baby!
2025-03-22 03:10:19
47
Wheelies and wheelspin :
I've done it ALLOT and it's ALWAYS worked but again I'm a welder by trade flux core isn't the best welder to use for this MiG and tig are the best options and ideally you want less wire than heat.
2025-03-22 03:25:15
5
bmattila1974 :
Weld the nut, let it cool, heat up the exhaust, around broken stud, remove.
2025-03-24 03:16:34
0
Rawand :
When you weld it then you need to cool down as water
2025-03-24 22:31:54
1
dcoke407 :
helps to gring the top of the stud for penitration if it's sticking out and not use an impact
2025-03-22 14:38:26
1
Eric Schrader :
oil was your issue
2025-03-23 07:30:44
0
ssriprider :
place yourself under arrest
2025-03-24 02:48:16
1
logger :
Use a wrench
2025-03-23 18:47:29
0
To see more videos from user @802garage, please go to the Tikwm
homepage.
