@chrisfixit: My buddy wanted me to install a new steering wheel in his car that retained the factory airbag for safety so here is the basic process. 1. Disconnect the negative terminal from the battery and wait 15min. 2. Unscrew the two bolts holding in the factory airbag and remove the airbag. 3. Disconnect the airbag and place it face up somewhere safe, away from you. 4. Unscrew the nut holding in the steering wheel and pull the old steering wheel off. 5. Out with the old steering wheel, and in with the new. 6. Add a little medium strength thread locker to the nut and tighten the nut to spec. 7. Reconnect the airbag and steering wheel wires. 8. Reinstall the airbag and tighten the two side bolts to spec. 9. Reconnect the battery and enjoy your new carbon fiber steering wheel! #ChrisFix #CarbonFiber