@dmrbikes: No better feeling having a fresh set of deathgrips! 1. Remove your old grips and bar end plugs. 2. Thoroughly clean and degrease the handlebar. 3. Ensure there is at least 130mm of free bar space for each grip. If necessary, move your controls to create the required 4. Fit the new DMR Deathgrips onto the handlebar by pushing them on all the way until they won't go any further. You may need a soft faced mallet or similar to tap them on to fully engage the unique taper-end of the Deathgrip. 5. Make sure the collars are fully located on the grips and tighten the collar bolts to torque (2nm). Do not overtighten the collar bolts, only tighten them enough that the grips will not rotate under force. 6. Confirm that the grips and controls are securely in place. Twist the grips hard to ensure they do not move. 7. NOW GO RIDE! Don't compromise, go for the original and the best... The DMR Deathgrip. Available in a massive selection on colours, with key grip features giving you the ultimate riding experience. @brendog1 #deathgrip