HH Tiling
Region: GB
Monday 07 April 2025 19:23:19 GMT
110610
1061
297
242
Music
Download
Comments
M C :
Dril the corner then cut to the dril hole
2025-04-07 19:28:40
3
scorpiusltd :
tile likely cracked upon installation. Has been made more prominent as the underfloor heating has been on.
2025-04-07 19:50:02
2
MR Angling :
Shit tile mate it’s been over kilmed
2025-04-07 20:59:44
13
joe :
Everyone is an expert but often it’s a poor quality manufacturing fault , sad that the end user pays the price
2025-04-07 19:50:34
31
Amn 🇦🇺 :
I think the tile adhesive was not properly spreaded under the tiles. 😊
2025-06-25 22:42:05
4
🏢🌋 Stone 🗿🏛️ :
Before laying did you check the tiles passed relevant standards and had sufficient tensile strength for the job 🤔 Unfortunately this is entirely your fault if they do not pass 🤔😳
2025-04-08 13:30:01
2
Teenwolf25 :
As a sparky who installs a lot of underfloor heating, I’d always recommend “decoupling matting”, eliminates cracking although you probably already know. Why wasn’t it used tho is the question
2025-04-08 16:54:05
0
denkdichhappy :
Tiler here... Missing decoupling... Cracks of this Kind are indicator ground is moving too much... Nothing to Do with the porcelain
2025-04-08 16:25:28
1
ferris :
had a house done this after being down for 7 years.
2025-04-07 22:16:30
5
robert.jpeg :
thats marazzi tiles they are overcooked usually happens on them.
2025-04-08 18:18:21
3
Cosi Living :
If the tiles are an issue I would be interested to know who the manufacturer was? Are they Italian or Spanish tiles? Thanks
2025-04-09 19:05:32
4
naz🇧🇩 :
Hi need some advice please I’m having under heating then tiles what is the tile to use when having under heating please
2025-04-08 18:16:41
4
albert pike :
truth of the matter is , tilers get blame for everything. but this is why so many are getting of the bus , large tile exceeding 750mm are not fit for pourpous
2025-07-13 18:19:46
1
Dan oats :
It is down to the Ukraine war. They stopping suppling the clay
2025-11-28 09:34:18
0
Kingbilly1690 :
All the experts 😂😂😂 wow experts in everything
2025-04-09 19:01:17
0
Отопление & Климатизация :
thermal expansion of the base
2025-04-09 17:29:59
0
Aiden Miller5982 :
If you drill a circular hole then grind out the straight angle to it leaving a curve in the corner it’s stronger. 90degree is a weak point.
2025-04-08 10:24:10
0
albert pike :
what adhesive and matt did you use , also im completely perplexed as to why the kitchen was installed before tile layed
2025-07-13 18:15:39
0
Pev lee :
Have to drill corners with water had it happen to me twice
2025-04-10 11:15:41
0
m.m0507 :
weil sie nicht genug Kleber haben und es leere Stellen gibt und die Qualität der Fliesen vielleicht schlecht ist
2025-04-09 19:56:46
0
asfreshasthewind :
did you tile under the kitchen island
2025-08-22 21:31:23
0
Lewis :
Must drill hole first and then grind up to it or the L cuts will crack
2025-04-07 19:54:49
3
barry russell :
😁😁😁
2025-04-07 20:16:53
4
Dan oats :
Cracking only happens when you cut l. I’m telling you it’s because Ukraine war. There raw clay material in Ukraine needed for tiles. Now every tiling firm our going to other countries. Them cracks was there when you cut them you just didn’t see them. Read it on Google about Ukraine has stopped supplying. I got paid twice of shops because I now this reason
2025-11-29 08:00:24
0
KeysightTechnologies :
I agree. It’s the quality of the tiles.
2025-04-07 23:11:05
39
proaggy :
What a nightmare on every corner too 🤯 tiles most likely made from poor substandard material. Defo manufacturer should take responsibility
2025-04-08 05:34:55
13
Eaglekeeper :
That’s a bad batch, manufacturer is responsible 100%. If it were anything else then there wouldn’t be anywhere near the amount of cracks.
2025-04-08 02:29:15
13
aji070 :
That is why i tile the floor before putting in the kitchen. No need to do any cutouts around panels.
2025-04-07 22:32:33
6
seangrandpa :
🙄Knock on the tiles. If it's a hollow sound you 🦆Ed up! If it sounds solid, the floor has moved🙂. If the tiles are solid, you get paid to tile it again😁. If not you pay to tile it again😔.
2025-04-07 20:07:20
5
bob johnston757 :
seen this loads screed always rising in the corners and your tile level wadges put corner tiles in corners and then they snap on the cut tiler should off known better
2025-04-08 05:40:35
4
Irishwhiskeyexplorer :
All the cracks are coming from a cut edge . Can it be expansion
2025-04-07 19:57:13
3
Steve :
Is it an Indian tile? I had this last year, extremely bad quality tile
2025-04-07 19:48:22
3
JaxTiling :
It's probably not the porcelain that's the issue—it could be a number of other factors. If you have a video of the job, we might be able to help figure out what went wrong. When tiling over underfloor heating, keep in mind that because the heat is transmitted from beneath the tile upwards, most tile adhesives require an additive to handle the thermal movement. It's worth looking into that as well.
2025-04-08 07:47:29
3
Krone Art :
Maybe the tile was overcooked in factory!
2025-04-08 06:07:56
3
Adz :
Big up to you for showing transparency on your page. Your a top tiler but we all come across little hurdles sometimes that are sent to test us. How you sound so calm god only knows
2025-04-07 21:43:40
3
John :
Under floor screed and heating had to be up to temp then down then tiles
2025-04-07 19:40:27
2
Gray Parker :
lava ivory, got it day in and out. not the tilers fault stacked high in the distribution centre too.
2025-04-07 22:47:47
1
Jonthehat :
Not sure about that chop 1 up let’s have a look at the screed 👀
2025-04-07 21:30:53
1
K&K Bathroom Solutions :
sharp cuts on a large surface are at risk of cracking, even if you used a matt , unfortunately, but that's how it is, you could have used metal corners Lglued them onto the resin under the tiles🤝
2025-04-09 17:29:15
0
John Swan :
sub floor moved
2025-04-07 21:12:47
1
Darbs :
ex UFH specialist here was accredited with Roth and reahu, it could possibly be the sub floor, was it screed or concrete? screed needed at least 1mm a day to dry at least for 30 days depending on.....
2025-04-07 21:12:07
1
Talisman Building :
Where’d you even go from here? Replace the whole lot? Sticking new ones back in there surely have the same issue
2025-04-07 21:33:39
1
James the tiler :
where were the tiles manufacturered ? i bet they were cheap shit
2025-04-07 21:07:42
1
Steveodiddlydoo :
How long was the heating on for before you tiled? I thought it was best practise to allow the heating a couple of weeks to dry the floor out completely.
2025-04-07 22:12:02
1
briandornan559 :
Hour skirtings are also tight to tile so when the heating comes on the floor rises and that causes cracks
2025-04-08 06:52:17
1
Daniel Hunter1029 :
For one, on your first video you only showed one tile now your showing all of these, and if you don’t want anyone’s opinion then don’t put out a video
2025-04-07 21:47:31
1
ct_⁸⁰⁸ :
I was lucky enough to use Vietnamese porcelain on a job not so long ago. whatever way I tried to cut them they shattered in random places. I attempted the same cut 5 times. bad
2025-04-07 22:06:04
1
Terry Phipps273 :
Screed base is moving with the weight of the island
2025-04-07 19:31:38
1
user7112823876384 :
How thick are the tiles
2025-04-07 19:35:05
1
chrispeeeeeeee :
I follow you, your work is extremely good so could not be workmanship. Who’s expense is the rip out at out of interest? Tile supplier/manufacturer/homeowner/ tiler?
2025-04-07 19:38:23
1
Sean Flynn :
Where’s the expansion ?
2025-04-07 19:40:58
1
Alec Stan :
my guess it's movement in the screed, if its been screeded on celotex and hasn't been secured/fixed down laid with reinforcement and/or less than 75mm then the flex/movement in screed is over toleranc
2025-04-08 10:24:41
1
user9798161284207 :
Damn bro that sucks. Are you demoing all the tile and putting a new porcelain?? As this product must be defective or just replacing the L’s and hope it doesn’t do it again?
2025-04-08 10:23:48
1
Greg :
Shit tiles plain and simple.
2025-04-08 13:31:55
1
hemano50 :
There is tension in all tiles. If you dont drill the corner before cutting into the drill hole, this can happen. More likely in certain tiles. Nothing got to do with thermal shock. Just incorectly cut
2025-04-07 22:57:27
1
ddt_one :
I had this with good quality tiles, left the screed weeks, everything carefully, turned out ufh mixing valve had a manufacturing fault and over heated floor 🙄
2025-04-07 22:49:03
1
garymclaughlin036 :
Building materials in general are shocking, it’s pure greed.Im a bricklayer and you can’t break some bricks in half they shatter into pieces.
2025-04-08 08:16:36
1
waj :
owners should have done the floor first and then finished the kitchen
2025-04-10 09:29:54
1
Shaun Morris1412 :
I know these tiles! I've been tiling for 40yrs and really struggled with key cuts, used different disks but they all failed! bad porcelain, never use with ufh
2025-04-07 20:49:00
1
To see more videos from user @hhtiling, please go to the Tikwm
homepage.
