motogadget_official
Region: DE
Thursday 24 April 2025 12:50:53 GMT
127961
6003
33
214
Music
Download
Comments
MimsyMad :
or just forget the LEDs and stick with filaments. leds look bad and devalue the bike, especially old bikes
2025-04-24 16:25:47
185
Gregor_on_Derbi :
Didn't know that BMWs come with turnsignals
2025-04-24 15:59:57
86
Dayvid :
Why do you call it a “flasher”? Its a relay, turn signal relay. That way when prople are looking up parts, they can find the correct parts rather than using nicknames and misnomers
2025-04-30 00:14:11
12
CavemanCore67 :
The led seems too close to the headlight, might not be able to see it head on
2025-04-25 18:38:33
1
piggy987 :
the flasher on my bike went out and is $120 OEM looks like I'm just converting to led lol
2025-04-24 16:23:48
2
gabe_drives :
You can also buy relays to fix the hyper flash. I got one for my car and you can adjust exactly how fast you want the bulb to flash
2025-04-24 20:35:16
0
Hulk✌️ :
I just put resistor on one wire and it works. the cost is fewe euro cents
2025-05-11 06:00:26
1
Alexander J. Smith :
they make aftermarket replacement relays for some bikes that are designed for LEDs 👍
2025-04-24 15:51:51
0
pie :
thanks man😎👍
2025-04-24 15:31:24
0
Tobik._ :
Mine isnt clicking where is it?
2025-05-27 21:08:01
0
Jamie Davies :
Motorbike electrics seems like going back 40 yrs in time.
2025-05-19 05:11:59
0
carhartt criminal :
could this possibly cause a parasitic drain, or would that be a separate issue?
2025-04-25 21:52:55
0
💣 :
mine isn't led and is not flashing
2025-05-15 13:40:30
0
Thelux :
Sometimes you need to add additional diodes in line to the indicator light on the cluster As the globes will try to pull earth from the opposite indicator and will not work as simple just changing the flasher.
2025-04-26 00:00:15
0
Freek_vv :
Not if u have a bcm
2025-04-24 17:11:20
0
Ryan Naidoo :
😁😁😁
2026-01-06 01:56:47
0
Rodolfo Voigt :
🥰
2025-11-04 14:47:28
0
💫🖤💙 timmy time💙 :
🥰🥰🥰
2025-05-02 22:09:04
0
️ :
@SaesvuoFreestyle voiko olla kotarissas näin?
2025-04-24 19:43:45
0
DJ Mxsery :
Hello everyone, I have converted all the indicators and the license plate lighting on my Rieju MRT 125 to LED. A load-independent flasher relay (8-12 V) has also been installed. Nevertheless, the indicators do not flash, but only light up permanently. Interestingly enough: → When I unplug the license plate light, the indicators flash very quickly. → With the license plate light plugged in, they only light up constantly but do not flash. Does anyone have any idea why this is? According to the manufacturer, the relay is load-independent - but still no improvement. Polarity and ground seem to be correct. Would be grateful for any help or a wiring diagram tip! Übersetzt mit DeepL (https://dee.pl/apps)
2025-07-12 22:41:55
0
Jacky ☕ best boyo :
Just put halogen bulbs. Problem solved
2025-04-25 20:24:55
0
ZIMMAR :
I think a resistor can fix this cheaply
2025-04-27 18:59:37
0
Bernard :) :
or you just solder in resistors
2025-04-25 07:28:47
0
Felix :
Or, hit up an auto parts store and get a internally resisted flasher relay, they make them for cars, two and three pin, and is just a hot swap part
2025-04-25 14:28:43
0
andrewflint94 :
or you can stick a resistor in series
2025-05-10 02:34:13
0
To see more videos from user @motogadget_official, please go to the Tikwm
homepage.
