Bro they didn’t fix it.. They were supposed to adjust it back to the ridges so it can lock in. 💯
2025-05-17 22:56:34
0
Twinjcharters :
Buy a new one
2025-05-15 02:56:26
0
Marron repairing :
@Cory24McDonald
2025-05-14 21:09:25
1
love fishing@🔥FIRE&ICE ❄️💜🧡 :
❤️
2025-05-17 15:55:29
0
Michael Pendergraft :
Looks like there is a set screw where your thumb was
2025-05-14 23:57:28
0
Justin power :
There should be a set screw in that hole see if there is an you should be able to move it
2025-05-14 20:00:04
3
RigRanger :
I am an ASE certified MinnKota repair center. Those motor housing and shafts are factory glued, the proper repair is a new housing and shaft.You might be able to JB weld it but you have to get it deep and slide that gap up, then pull the wires in the head. Message me if you would like anymore help!!!
2025-05-15 02:43:10
1
Randlethefishy :
Rubber mallet and marine glue
2025-05-14 19:59:35
1
OneHitWonder :
Duct Tape
2025-05-17 03:01:31
0
Cubera Snapper :
Rubber mallet on the skeg
2025-05-16 04:01:11
0
Aj :
Galvanized hose clamp
2025-05-15 21:38:05
0
marvindauzat541 :
don't use it water will get in
2025-05-15 13:32:23
0
MrWildlyfe270 :
put you a short set screw in it just to be safe bossman
2025-05-15 03:45:11
0
genokeithfishing :
You probably need to order a new shaft and you have to glue it in and stuff the wires through the shaft not the biggest deal in the world I’ve done it
2025-05-15 02:51:58
0
Bill Bear 🐻❄ 🇺🇸 :
maybe take it someone that works on them and ask their advice but you do the work so they don't charge you .
2025-05-15 01:37:27
0
Bill Bear 🐻❄ 🇺🇸 :
smack it with a rubber mallet . if it has a set screw loosen it first
2025-05-15 01:35:13
0
Steve Jobs :
Insurance should have replaced that
2025-05-14 23:17:44
0
Justin power :
Try removing the prop aswell an see if there is a set screw in there
2025-05-14 20:01:50
0
To see more videos from user @hazlifefishing, please go to the Tikwm
homepage.