The Car Care Nut
Region: US
Sunday 18 May 2025 00:00:13 GMT
125549
1708
25
65
Music
Download
Comments
SuperSaker :
Yes: remove them, clean them and lubricate them… every time…
2025-06-14 11:27:56
11
Former homosexual :
Why would you call the correct way to do it going overboard
2025-05-19 16:11:22
15
Turbod :
Legally, you do what the manufacturer tells you to do.
2025-06-21 00:09:57
1
JJ68 :
I personally always remove and clean these pins. Then apply a thin coat of non metallic high temperature grease along the length.. but not to the tips of the pins. I don’t regard it as going overboard and it only takes a few seconds to do c
2025-06-02 14:12:12
3
David :
in my Toyota they rattle
2025-06-03 14:12:04
0
Thomas Lascascia :
living in maine winter and salt are brutal so I do it every time
2025-06-12 15:56:23
1
NzuzoFuze :
what happens when those pins can't move at all?
2025-12-23 17:00:03
0
user7903355967560 :
What kind of grease is that
2025-05-18 00:36:50
1
BizzarosCanada :
yes totally agree ..30 years in
2025-05-30 06:39:37
0
John wrench 🔧🛠️ :
AMD greetings to you am one of your fans. I followed you on YouTube tiktok, and got notifications for all your educational videos
2025-05-31 13:45:05
0
user2062775472536 :
I got a brand new caliper from skoda. pins were greased.
2025-07-13 16:05:52
0
user58392411413650 :
This guy is a legend
2025-06-02 12:30:07
0
MANNY :
You vjdeo is very good, but the videos are short.
2025-06-11 03:52:48
0
Cruz DI Martinez :
this guy supposed to be a big mechanic of course you have to grease inside and on the pin
2025-07-15 19:56:01
0
tj :
❤️❤️❤️
2025-05-19 20:06:47
1
Castiii24 :
😂😂😂
2025-11-01 21:31:15
0
meteorite & rocks :
🥰🥰🥰
2025-06-29 06:56:33
0
Castiii24 :
❤️❤️❤
2025-11-01 21:31:16
0
leon1157 :
😳😳😳
2025-06-11 13:20:25
0
RelentlessSavior :
This is one of those things I feel like you do just because you're down there and it doesn't take any extra time to do so you might as well get it done
2025-05-19 04:10:43
2
C’mon you blues :
Heat cycles from braking will break down the grease over time. I always clean the pins, remove the old grease from the bores with a small copper brush on a drill and brake clean. Apply new silicone lubricant on the pins and reassemble
2025-07-07 21:31:15
0
Unknown :
Does a pin sticking cause the vehicle to jerk significantly after releasing the brake from a complete stop?
2025-07-09 19:15:49
0
To see more videos from user @thecarcarenut_official, please go to the Tikwm
homepage.
