Masterpainter
Region: US
Monday 16 June 2025 20:35:57 GMT
27501
470
23
25
Music
Download
Comments
Chris Walker73685 :
no your getting solvent pop cause your not waiting long enough in between coats of clear
2025-06-18 17:17:28
2
Jesus Arredondo7971 :
it's cause your lay down to much material at once. and not letting it flash
2025-06-17 01:04:52
31
waltermurphy788 :
Allow enough time for every coat to flash before applying the next coat
2025-06-17 16:50:36
4
Matthew Gardner :
Some clear can’t be used for 3 coats transtar is notorious for silver pop with 3 coats manufacturer say 2 coats never had silver pop with 2 coats but almost 50% of the time I put 3 coats I get silver pop
2025-06-17 08:59:00
3
dylan :
No either base is not dry or you’re spraying your clear too soon, 3 coats you can’t spray when it strings you have to spray when it’s tacky
2025-06-16 22:53:38
1
Matt Jaeger720 :
Don't forget to check the humidity beforehand too. Had to deal with that this week but I live in Texas. Like you said though, use a slower catalyst and thinner in that case also.
2025-07-17 23:09:37
1
on and off :
Respect flash time
2025-06-30 13:27:58
1
Richard Hancock :
How do you set your gun?
2025-08-12 01:59:54
0
Bruce :
Solvent popping is largely due to tge dryer used to mix the paint. Try shutting the booth off once it clears to slow to ex clear from skinning over and trapping solvent. I use thin first coat to full dry then back to back medium reduce
2025-06-17 03:43:37
0
johnny_blaze19 :
correct your base is not dry
2025-06-16 21:27:48
1
cheapgas1953 :
We used to get them if we turned the exhaust fan off too soon after the last coat.
2025-06-17 00:29:20
0
Foxheadworkshop :
I've gotten solvent pop. Everything I've read says it's due to not waiting long enough for the solvent to finish flashing off, and the solvent is evaporating through the new coat. Solution: wait longer between coats.
2025-07-04 10:36:40
5
Magnificent.Myth.Big.One :
🥰🥰🥰
2025-10-08 16:54:24
0
Momba_videoproductions :
😂
2025-07-25 05:36:59
0
Tom Walker The Music Man :
question: I have that white crap on top of my car what grit of sandpaper and how far do I need to cut it to re-clear? thank you
2025-06-18 17:27:26
0
️ :
Here’s a tricky one. Hammertone paint
2025-06-30 05:02:29
0
Article15customs :
Patience in body work patience in primer and sanding patience in base coat patience with clear patient with wet sand…patience with buffing…patience is the hardest skill for younger guys to learn I know it was mine
2025-07-08 02:38:44
0
Abundio Rodriguez :
👏👏👏
2025-07-21 05:03:59
0
Nick gebhardt :
I know my 2042 if I do 3 coats no matter what will pop, seems like the faster production clears will pop
2025-06-17 12:22:33
0
To see more videos from user @jpautowork, please go to the Tikwm
homepage.
