what happend to your left hand? looks like a crazy bad scar
2025-07-08 04:17:31
1
Joey :
Brake conversion kit. Replace the girling with modern brakes and bypass your problems.
2025-07-08 11:00:23
5
Peace_Maker :
550 rpm is actually pretty good. has its advantages such as reduced wear and less fuel waste at lights and stuff. plus, if that is where the engine naturally sits, leave it be.
2025-07-08 05:43:52
10
calmateTU :
yeah I'd 100% pass on this not worth fixing
2025-07-08 00:28:03
13
nohamburgercheeseburger :
Lucas Gerling Brakes are nothing but a hydraulic wedge brake. Air wedge Brakes suck too. Too many moving parts.
2025-07-08 10:41:11
2
𝒦ℴ𝒽ℯ𝓃 :
the boat i just got was the same way, sat for 3 years, didn't run and also has no brakes i solved 2 of those 3 problems just can't figure out the brakes🤔
2025-07-08 00:29:23
16
cmoore363 :
Brakes are a nightmare on these. I have a 95 and I have had to replace pretty much everything. Mine sat for 5 years and wish I would’ve just replaced the whole system at once. Would’ve saved a lot of time and $.
2025-07-08 01:28:11
15
Ghostof65 :
go buy a tarp and some bungee cords and when it's going to be bad weather just cover your location and continue your job..30x30 size should cover up..and they're cheap -harbor freight- and you just fold it up and tuck under your tool box in your truck 👍
2025-07-09 03:16:51
1
Mike :
Just came here to remind everyone that these ARE NOT air brakes.
2025-07-08 01:05:59
8
baconrus76 :
Sent our f700 into the shop to have the same brakes redone. 7000 grand later they work great 😂
2025-07-08 00:39:31
78
Kevin Demarco :
I am going to say the motor is bad. Very common problem. This brake system on those trucks suck. One thing i will tell you is your local napa can get almost all the brake parts.
2025-07-08 02:47:57
5
Matt :
booster is froze up, needs a new booster. had a f800 with the same set up, same issues. its the booster
2025-07-08 09:50:12
1
user5428377087143 :
I have a 93 f700 same setup with it sitting for so long chances are electric motor is shot and also I have had to change my brake master cylinder multiple times after winter which I don’t drive it normally from end of October till the snow and salt is gone and the seals in master cylinder go. Napa will have most parts for the Lucas brakes and or try fleet pride in Lawrenceville they had had the hydraulic parking brake cans
2025-07-08 02:16:45
4
Ravenfy :
Cant you just change it while the engien is running?
2025-07-09 04:56:05
1
Birddog1645 :
What brand wrenches were you using?
2025-07-08 03:10:02
0
Alexander Black :
careful if gotta replace those tires. them rims are dangerous so would have to probably change out the spindle for a different rim
2025-07-08 01:17:52
18
LibTearsFeedMe :
Give us more generator content pls!! That’s been my favourite series so far. I’d love to see how you fix the dents and paint it, we need a conclusion to the generator story ❤️
2025-07-08 05:46:00
1
panzar :
do u need to turn the engine off every time you want to adjust idle?
2025-07-08 00:31:15
12
chancla_78 :
Saw a different video and didn’t realize it was the generator dude glad to be here again
2025-07-08 01:41:37
2
Chase F :
My TBI GMC sometimes idles at 200 rpm or 700
2025-07-08 04:47:25
2
Dillfuego :
do you have power present at the relay connector? on some models, the relay control gets ground from the master cylinder switch and power from the flow switch at the hyro booster. check it out
2025-07-08 01:40:44
3
Jasonmfnv :
Clean old truck! Can’t wait to see the progress
2025-07-08 01:56:15
2
🙏☦️Turn To Christ☦️🙏 :
when you get the truck running good and brakes good sue it to tow the generator around
2025-07-10 14:26:29
1
gary195812 :
Starts and runs perfect. 500 Rpm is just fine.
2025-07-08 03:02:08
1
To see more videos from user @mark_decola, please go to the Tikwm
homepage.