Bad day / nice of you to share / humble guy respect
2025-07-19 12:11:50
37
gasman723 :
Had that happen to myself too. Hot and cold reversed 🙄🙄
2025-07-19 08:50:35
6
dan :
got caught out on a logic last month , turned off water inlet to change cartridge , it blew out with water everywhere .... hot and colds were reversed 😂😂😂
2025-07-19 14:59:24
5
Craig-Scaife :
That kind of trope is the most stressful part of the job !
2025-07-19 16:38:07
2
bbsplumbersltd :
Had to replace a flow switch on a potterton, this was in 3 floor apartment. Forgot to put the bracket screws in and filled it up, baring in mind it was a big system, as I’ve put my head down, bang water gushing out and it went everywhere!!! Downstairs, pcb, you name it, it went there, proper bad one this looks like a breeze through the park 😂😂
2025-07-20 22:01:37
1
user5526084712716 :
never trust the ideal logic valves 😂
2025-07-20 07:41:10
1
dsingh0501 :
😂👏 All been there
2025-09-05 13:19:06
1
Matthew Erridge :
I’ve done this before and it’s makes you **** yourself 😂
2025-07-19 21:09:31
1
The Dadbod & Harribo :
I worked for a boiler manufacturer and isolated it on a new build. Undone the flow turbine and it blew off, reversed connections 😳 lucky the hadn’t done the flooring yet 😂
2025-09-14 07:52:06
1
Vtr Heating :
Not gonna lie we all do it 🤣🤣🤣
2025-07-19 19:29:58
1
Mark Kennedy :
Happened to me about 3 weeks ago 🤣
2025-09-15 07:45:04
1
Wilbert :
that was like an episode of Mr bean
2025-07-19 16:38:00
1
Dave Lucas78 :
Turn off water and run integral fill loop to see if it pressurises the boiler. Never know who has been doing abit of plumbing diy.
2025-07-19 15:51:24
1
brad :
makes the old ring tighten..
2025-07-19 15:36:26
1
wavolfc79 :
isolate under boiler
2025-07-19 14:40:11
1
reaganjohnson2716 :
we've all done it and probs won't be the last time either 😂
2025-07-19 13:36:52
1
Reggie :
happened me on a hose on vessel on a intergas before it spilt on me 32kw massive heat exchanger water everywhere.the board survived tho.was the board ok on that?.
2025-07-19 13:32:47
1
gasmangully :
What was it? Hot and cold wrong way round? I did it in a back duotec. Luckily boiler was in an out house lol
2025-07-19 13:03:55
1
Wingspan Memories - Uk Drones :
Whoops
2025-07-19 11:41:24
1
Gaz :
🤣 remember when you showed me this! “Pleaseeee” 🤣
2025-07-19 08:56:11
1
Arslan :
Reverse hw/cold
2025-09-01 13:59:17
0
ToplessTravels :
when changing the flow turbine it's best to open hot taps mandatory because you know for certain someone will use the toilet then try to wash their hands with hot , soon as you whip the old one out.
2025-08-16 05:47:26
0
thegasdog :
🤣
2025-07-24 06:52:25
0
Woodford Bathrooms & Boilers :
🫡
2025-07-22 19:13:47
0
HeatingandDrinking :
feel for you😫 what a nightmare
2025-10-12 15:31:17
0
Connor Graham :
Had this once, isolated the water from under the boiler opened a tap to make sure it was off. loosened cartridge and found out it had been piped up wrong way round🤷🏼♂️happens
2025-07-21 08:27:32
0
holty :
Few week ago was replacing an ideal imini 12 years hot and cold was reversed. No stop tap indoors and shared mains. 🙄
2025-07-20 18:41:54
0
DEANOSAUR :
Had one like this. Cold in and hot out was wrong way round
2025-07-20 18:05:00
0
user6016392510352 :
We've all been there!!
2025-07-20 11:01:47
0
callumkaid :
I did it on a caravan commissioning. Hot water fault on install. Built in the factory and the hot and colds were the wrong way. I turned it off under the boiler and removed the turbine and flooded the hallway luckily the wet vac sorted it quick enough. Worst thing with caravans is the stopcock was barely accessible without crawling! Replumbed it, removed the PCB and dried it off and boiler worked a treat! The factory also fitted an NG boiler for a Propane set up and got all the G30 injectors wrong in the hob.
2025-07-19 23:11:14
0
Wilbert :
what pun popp3d out
2025-07-19 21:31:19
0
paulus_aurelius :
Hot and cold piped the wrong way around? 🤔
2025-07-19 20:22:55
0
Vtr Heating :
looks like a logic blue valve if its not jammed
2025-07-19 19:30:48
0
larfagan :
happened me on a Viessmann combi. nightmare
2025-07-19 16:46:13
0
user2561821019616 :
What were you doing here? Can’t quite see it. Changing plate hex?
2025-07-19 13:30:14
0
To see more videos from user @jb_verdeheat, please go to the Tikwm
homepage.