Jeff Thorman
Region: CA
Wednesday 30 July 2025 20:58:29 GMT
56962
1023
67
8
Music
Download
Comments
Jay Dering :
Don’t understand why you can’t just upgrade the header
2025-07-30 21:54:02
40
crfgggt :
Change the header 🤔
2025-07-31 01:11:22
2
user9050212346344 :
Put a steel plate in on side of the header after jacking the header up
2025-07-30 23:50:31
16
Joe :
Upgrade the header to lvls double 9 1/4 add new trimmers. Cut the nailing fin on the old window and install a replacement from the inside. What’s the problem?
2025-07-30 21:13:49
7
ayeung74 :
it has carried that load for 50 years. I think it works fine...
2025-07-31 01:57:03
13
Joey 16 :
add another 2 by 10
2025-07-31 00:13:09
2
A Moon Laying Space Dragon :
could get lvl mulled units and shim off those. or stud pocket and put your own studs in between them
2025-07-31 03:22:09
2
evan_badgerow :
build a wall to carry the roof load, pop out and replace header, add a couple more Jack's and then get a new window
2025-08-22 22:03:04
2
blheli :
Install a steel fletch plate or LVL
2025-08-14 00:20:28
2
Susan Anderson :
Just upgrade the header. It’s basic as it gets. If you’re worried about getting the same size glass, put in a steel header. Why is this so complicated?
2025-07-31 02:07:09
2
Steve Sevonty :
not a window problom it is a structural problem.
2025-07-31 04:10:46
4
Trysten Hawki :
Pull out the header installl a LVL header for double jack studs on each side. Put whatever window you want in as long as you have a 1/2 inch gap all the way around the window and shims only on the sides and bottom.
2025-07-31 19:40:15
2
jamesedwards5638 :
put a temporary wall in to support load from Heather take out existing header use two by tens and a steel fish plate in between it
2025-08-01 00:24:45
2
2L8uLuz :
Replace header with iron or lvl problem solved
2025-07-31 04:18:30
2
Libsofbluesky :
Install temporary ceiling bracing on the inside. Pull out all of the windows and the header material. Install a Parallam header, make sure you have Jack studs and then install a all aluminum picture window.
2025-08-06 02:58:32
1
Tylerusa2012 :
If it's not moving down what is the problem.
2025-08-01 04:06:59
2
SmilingFlower :
add a additional header ?
2025-07-31 18:42:01
2
Rodb2272 :
LVL.
2025-07-31 01:02:25
3
KillaCamFit_ :
Why are we not just upgrading the header to multiple LVLs or a PSL? There’s a ton of header options and they’re all cheaper than a brand new massive window
2025-07-31 04:00:38
2
jamesheflin539 :
use quarter inch angel iron to reinforce the structure to reinforce your overhead structure and install steel framed windows to reinforce it further
2025-08-04 02:34:30
1
Mckenzy Vaniddeking :
50 years later.
2025-07-31 07:25:17
1
1/4 Pounder :
Re-square the header and brace with angle iron. Use single metal pole in middle and split to two windows if you have to.
2025-07-31 04:04:37
2
Joseph :
I'm sure you know what you're doing but talk to Grandma
2025-07-31 15:24:58
1
T-NASTY :
google better header and get one and put in
2025-07-31 02:06:56
1
Gabriel :
Just use the structural mortar you used in another-one of your videos to "secure" a toilet from rocking & moving. That should help you! It's right next to the structural drywall, the sky-hook and the toe-nails at the hardware store 😂
2025-07-30 21:26:10
4
To see more videos from user @homerenovisiondiy, please go to the Tikwm
homepage.
