Steps to Remove Yellowing from Plastic Headlight Lenses (DIY Style) Disclaimer: I'm not a professional—just a DIY enthusiast. This method worked for me and might help with your headlights too! 🛠️ What You’ll Need: * Masking tape * Sandpaper (1000, 1500 & 2000) * Buffing machine or drill with foam pad * MTX Supra Cut 1.0 (or your preferred cutting compound) * Microfiber cloth or clean cloth 🔧 Step-by-Step Process: 1. Clean the Headlights Wash the lenses thoroughly with soap and water to remove dirt and grime. Dry them completely. 2. Tape Off Surrounding Areas Apply masking tape to the edges of the headlights to protect your paint and trim from accidental sanding or polish splatter. 3. Wet Sand the Lenses * Start with 1000 grit sandpaper, wet it and the lens, and sand in horizontal strokes. * Progress to 1500 and 2000 grit, changing direction with each step (e.g., horizontal → vertical). * Keep the surface wet at all times to prevent scratching. 4. Buff the Lenses * Use a buffing machine or a drill with a foam pad. * Apply MTX Supra Cut 1.0 (or similar compound) and buff the lens until all sanding marks are gone. * Don't stay too long in one spot—keep the machine moving evenly. 5. Wipe Down Use a clean microfiber or clean cloth to wipe off the residue and inspect the finish. ✅ Tips: * Be patient—sanding and polishing take time. * Always test on a small area first. * Do this in a shaded area to avoid premature drying of compounds. 🎯 Follow for more DIY tips! #viosmodifikasi #viosmodified #viosdugong #viosgen2 #vios #toyota #cartok #gen2 #DIY #headlightrestoration #viosnation - @rraymundo21