@muntahamonm20: تحضيرات المشاية 🦋 اكتبوا اسمائكم اهديلكم خطوات ♡

سِــدْرَةِ الْمُنتَـهَى♡
سِــدْرَةِ الْمُنتَـهَى♡
Open In TikTok:
Region: IQ
Tuesday 05 August 2025 12:33:09 GMT
126550
2615
54
46

Music

Download

Comments

22_20fff
فطوم 🦢 :
عليج الله المشايه هم تعب اول مره اطلع السنه😞😔
2025-08-06 11:27:04
1
9.lt._
عــلــيــان ⛎ :
دور ثاني 💔😔
2025-08-05 16:55:04
4
nari4510
𝐋𝐮𝐧𝐚. :
اسمي نرجس
2025-08-05 13:33:55
4
fatoum_017
🐋 :
درب السلامه إن شاءلله 🌷🤍.
2025-08-05 12:44:41
1
ali133929
Ali,🫀 :
طريق السلامه
2025-08-10 06:26:12
1
497_85
ڪٰلـٰب مِـتٰـعوبٰ :
بسلامه عمريَ.💚🌿
2025-08-06 07:26:13
1
fati50313
ࢪيحـانة الحـسن المجـتبى؏ :
درب السلامة ان شاء الله
2025-08-05 12:47:02
1
h370637
الحساوي :
توصلين بل السلامه
2025-08-05 19:56:16
1
as21ru
خادم سيد الشهداء :
مأجورات أن شاء الله
2025-08-06 10:59:16
1
.m32675
شــ⃪⃪عـ⃪⃪و⃪⃪ࢪ↡𓆰𓆩 :
صار 7سنين مشايفه كربلاء 💔💔😔
2025-08-06 11:20:10
2
rada5.22
🎭『 رِضـا | 𝐑𝐄𝐃𝐀🇮🇶 🎭 :
الله يتقبل منا ومنكم صالح الاعمال
2025-08-05 13:56:47
1
7h_3_u4
حـسـ⃪ِـيـن فداءٰ للزۿࢪاء✨🤍🦋 :
اني باجر اطلع🙂✨
2025-08-05 16:50:52
1
.ruqayyah176
♡ Ruqayyah ♡ :
والله صورت سيد علي سيستاني محلي الفيديو كله 🤏🦋😞💔
2025-08-06 11:52:12
1
abas3116
Abbas riad 313 :
بل سلامه
2025-08-05 23:52:10
1
t.zj4
سيد رضا الموسوي :
درب السلامه اخويه
2025-08-06 10:50:07
1
_7xll_7_5
🔸حمدون🔸 :
125 وانه ماخذ بس ال12 لو ارجع بيه كروه لو لا 😂
2025-08-06 20:25:31
1
af.20d
" :
بلكت باجر اروح من الحله👍
2025-08-10 07:52:05
1
6_8.t5
سويجد † :
وصلت عفج ونتم🥰
2025-08-06 16:56:58
0
user543727164
مروان المياحي :
اني بس كروه😭
2026-07-26 18:52:03
0
o229o
𝕊𝕋:-✪ :
⚔️فٰٖـٰـٰـٰـٰ F👮🏻‍♂️⚔️: يرحم اهلج اختي اهديلي خطوات ولله بدوام ومالحك ازور💔 + الاسم فلاح
2025-08-05 14:40:17
2
a2006a.2
عصام :
وين وصلتي
2025-08-05 20:46:24
1
userniadssvjwo
أحسان علي :
♥💛💛
2025-08-21 05:53:01
1
salad.lfth
سجاد💔 :
👑👑👑
2025-08-13 06:48:31
1
geed0099
ابن ذي قار :
🌹🌹🌹
2025-08-05 12:37:31
0
To see more videos from user @muntahamonm20, please go to the Tikwm homepage.

Other Videos

How to Make a Mini Hellcat From a Monster Can #fyp #monster #hellcat #DIY Materials:  1 Monster Ultra can  Craft knife/X-Acto knife  Precision scissors or metal snips  Metal ruler  Tweezers  Small drill or pin vise  Super glue  Sandpaper (400–1000 grit)  Black model wheels  Cutting mat Step 1 – Prepare the Can 1. Empty and rinse the can. 2. Remove the top and bottom. 3. Cut down one side and flatten the aluminium sheet. 4. Place it under a heavy book for a few hours to remove most of the curve. Step 2 – Create the Templates 1. Find or draw templates for:     * Chassis     * Floor pan     * Side panels     * Bonnet     * Roof     * Front and rear bumpers     * Spoiler 2. Scale everything to the size you want the finished Hellcat to be. Step 3 – Transfer to Aluminium 1. Tape the templates onto the flattened Monster can. 2. Position the graphics so the Monster claw logo ends up on the bonnet, roof and doors. 3. Trace every piece carefully. Step 4 – Cut the Pieces 1. Cut out all body panels. 2. Leave a few millimetres extra around edges. 3. Trim gradually until each piece fits perfectly. 4. Sand all edges smooth. Step 5 – Build the Chassis 1. Fold and glue the floor section. 2. Add support pieces underneath. 3. Make sure the chassis stays perfectly straight. Step 6 – Form the Hellcat Body 1. Bend the side panels by hand. 2. Shape the wheel arches using a pen or marker barrel. 3. Curve the roof section slowly. 4. Attach:     * Side panels     * Roof     * Front section     * Rear section Step 7 – Add Details 1. Create:     * Hood vents     * Front splitter     * Side mirrors     * Rear spoiler 2. Use leftover aluminium scraps from the can. 3. Shape each piece with tweezers before gluing. Step 8 – Install Wheels 1. Drill tiny holes for axles. 2. Fit model wheels. 3. Ensure all four wheels sit level so the car doesn’t wobble. Step 9 – Final Assembly 1. Attach the bonnet and bumper pieces. 2. Touch up any uneven edges. 3. Polish the aluminium with a soft cloth. 4. Clean away glue marks.
How to Make a Mini Hellcat From a Monster Can #fyp #monster #hellcat #DIY Materials: 1 Monster Ultra can Craft knife/X-Acto knife Precision scissors or metal snips Metal ruler Tweezers Small drill or pin vise Super glue Sandpaper (400–1000 grit) Black model wheels Cutting mat Step 1 – Prepare the Can 1. Empty and rinse the can. 2. Remove the top and bottom. 3. Cut down one side and flatten the aluminium sheet. 4. Place it under a heavy book for a few hours to remove most of the curve. Step 2 – Create the Templates 1. Find or draw templates for: * Chassis * Floor pan * Side panels * Bonnet * Roof * Front and rear bumpers * Spoiler 2. Scale everything to the size you want the finished Hellcat to be. Step 3 – Transfer to Aluminium 1. Tape the templates onto the flattened Monster can. 2. Position the graphics so the Monster claw logo ends up on the bonnet, roof and doors. 3. Trace every piece carefully. Step 4 – Cut the Pieces 1. Cut out all body panels. 2. Leave a few millimetres extra around edges. 3. Trim gradually until each piece fits perfectly. 4. Sand all edges smooth. Step 5 – Build the Chassis 1. Fold and glue the floor section. 2. Add support pieces underneath. 3. Make sure the chassis stays perfectly straight. Step 6 – Form the Hellcat Body 1. Bend the side panels by hand. 2. Shape the wheel arches using a pen or marker barrel. 3. Curve the roof section slowly. 4. Attach: * Side panels * Roof * Front section * Rear section Step 7 – Add Details 1. Create: * Hood vents * Front splitter * Side mirrors * Rear spoiler 2. Use leftover aluminium scraps from the can. 3. Shape each piece with tweezers before gluing. Step 8 – Install Wheels 1. Drill tiny holes for axles. 2. Fit model wheels. 3. Ensure all four wheels sit level so the car doesn’t wobble. Step 9 – Final Assembly 1. Attach the bonnet and bumper pieces. 2. Touch up any uneven edges. 3. Polish the aluminium with a soft cloth. 4. Clean away glue marks.

About