TheLightSpeed!
Region: US
Tuesday 26 August 2025 10:30:02 GMT
68169
870
125
58
Music
Download
Comments
Björn Hübner :
236micrometer IS 0.236mm and 0.556mm 0.236 IS the average accuracy or deviation of the movement with a max accuracy or deviation of 0.556. I have a X1C and calibratet it to a accuracy of 0.1mm
2025-08-26 12:41:45
6
Young_GPa_Gam3r :
As close the cnc as you can get makes zero sense. The printer operates on G Codes. That is, CNC - computer numerically controlled.
2025-08-28 18:15:13
5
eddie.morace :
Should have printed it before the calibration with that plate.
2025-08-26 11:22:23
96
phill fried :
lol my elegoo does 0.05 and cost me $300 - resin ftw
2025-08-26 15:59:19
1
Seb1537 :
The vision encoder build plate is meant for bigger prints not small ones
2025-08-26 12:05:47
7
Wacko :
Ya there’s like 20 other factors to get down to that level of tolerance that plate only really helps with skew which can be tested and fixed with an hour long print
2025-08-27 02:49:14
1
bobosmityuber :
personally I wouldn't buy one. the results are pretty solid and the price isn't too bad all things considered but I don't own a 3d printer. 👍
2025-08-28 18:42:57
1
panonyme :
the A1 already do 0.15 nicely ... 😅
2025-08-27 00:55:58
1
Billy Brenner :
I wonder if you could get below 15 to work if you use incompatible materials like PCTG and PLA. at those small distances, even with motion accuracy, The layers could just melt together. granted using multi-materials isn't always practical for real world print in place applications but I'm more just curious to see if it makes a difference in this particular print
2025-08-27 23:50:58
2
xX540xARCADEXx :
12 minutes?? No way. Mine does it in like 5-6 minutes tops.
2025-08-27 15:55:37
1
TheMickeyHampton :
any update on the single color? has my interest peaked
2025-08-28 04:10:18
2
Emili :
You should darken the room because the light Can messe up the calibration
2025-08-26 17:37:56
6
Bigshot Tinkers :
The best idea I’ve seen today was watching you store your plate underneath. 😃
2025-08-29 22:52:19
1
QJ :
I wonder if using the auto circle hole-contour compensation feature would help. That’s the setting they claim makes super tight tolerances work. Pretty sure it’s only compatible with some Bambu filaments though.
2025-08-28 22:50:43
1
MrCart00n :
very cool. .15 is pretty tight, lookimg forwwd to next test
2025-08-26 23:47:50
1
Schnittibugitti :
Try Prusa filament they have the tightest thickness tolerances and you can actually check the measured thickness over the spool length. Unnecessary 99% of the time haha
2025-08-26 21:10:44
0
TikTokcommentbot :
That’s in microns and it seems pretty high up there
2025-11-20 13:30:37
1
EsimerkkiEsko :
Motion accuracy =/= Printed part accuracy
2025-08-26 20:22:01
1
FelixChaos :
me here with a creality v2 neo that's a bit modded is also able to go wit 0.2 and even 1.5 when calibrated for that filament
2025-08-26 18:44:58
0
tatertottushy :
two things though. have you done this test before and what were the results and were you printing at a higher or lower mm/s than advertised. slowing down the print speed can drastically improve results
2025-08-26 21:03:57
2
tomosu :
That plate cannot affect the x and y dimensions or the amount of material the printer extrudes through the nozzle. The only thing you can do with it is achieve a perfect first layer because it checks many more points of z-axis deviation in microns.
2025-08-26 17:02:35
1
To see more videos from user @ls3dp, please go to the Tikwm
homepage.
