@renegadeusashop: Pro Red Heavy Cut Liquid Metal Polish from Renegade Products is a professional-grade liquid polishing compound designed for use on metals such as aluminum, stainless steel, chrome, and other non-ferrous metals. It’s called “heavy cut” because it has stronger cutting abrasives compared to regular liquid polishes. That means it’s intended for removing heavier oxidation, water spots, haze, light scratches, and surface imperfections before moving on to finer polishes for a mirror finish. Key points about Pro Red Heavy Cut: • 🛠 Aggressive cut – starts the polishing process by removing surface blemishes and oxidation. • ✨ Restores shine – brightens dull or weathered metal. • 💧 Liquid formula – easier to apply than bar compounds and works with polishing pads, buffs, or by hand. • 🔄 Step 1 product – usually followed by a medium or finishing polish (like Renegade’s Pro Blue or Red Shine) to refine the finish. Here’s how to properly use Pro Red Heavy Cut Liquid Metal Polish depending on whether you’re working by hand or with a machine/buffing wheel: ⸻ 🔹 By Hand 1. Prep the surface – Clean the metal to remove dirt, grease, or loose oxidation. A degreaser like Renegade Knockout works well before polishing. 2. Apply product – Put a small amount of Pro Red Heavy Cut onto a microfiber towel or soft applicator pad. 3. Work in sections – Rub the polish into the metal using firm, overlapping circular motions. 4. Buff off – Wipe away the residue with a clean microfiber towel. Inspect, and reapply if necessary for heavier oxidation. 👉 Best for spot touch-ups, trim pieces, or small jobs where a machine isn’t practical. ⸻ 🔹 With a Machine or Buffing Wheel 1. Choose the right wheel – Use a sewn cotton buffing wheel (spiral-sewn or tighter stitched for more cut) mounted to a grinder, drill, or bench polisher. 2. Apply polish – Put a small amount of Pro Red Heavy Cut directly onto the wheel or dab it onto the metal surface. 3. Polish the surface – Run the wheel at a moderate RPM, keeping steady, overlapping passes. Don’t sit in one spot too long to avoid streaking or overheating. 4. Wipe clean – Use a microfiber towel to remove polish residue. 5. Step down to finer polish – After heavy cut, follow with a medium cut (Pro Blue) or finishing polish (Red Shine or Rebel Red) to refine and bring out a mirror finish. 👉 Best for wheels, tanks, bumpers, diamond plate, or large aluminum/stainless steel surfaces. ⸻ ⚡ Pro tip: Pro Red Heavy Cut is a first-step polish. It removes oxidation and imperfections, but for a true mirror finish, always follow with a medium and finishing polish. #tiktokshoplabordaysale @Renegade Products USA @renegadedetailinglife @Clean Culture MDS

10086

There are no more comments for this video.

To see more videos from user @renegadeusashop, please go to the Tikwm homepage.