@ishmaelmechanic: #mechaniclife #mechanic #mechanicsoftiktok #ishmaelmechanic #mobilemechanic

Saulthetireguy512 :

Alberto Mesta :

Get yourself the correct tools. Especially if you’re going to be mobile. Easiest thing after that is to drill it out.

Qs Mobile Maintenance :

Use the right tool next time bro, harbor freight makes this big screwdriver that you hit with a sledge hammer on the end of it. Honda is notorious for needing that tool.

Miguel Guadiana :

you need to let the customer know that you need to be left alone why you are on your job if not you wont be able to do it

gtown4lyfe :

you didn't grease the backs of the brake pads 😁

Nadox :

IDK how you mobile guys work with the customer standing next to you. 😂 I’d straight up tell them to go away or I’m not doing it.

Kelz Mobile Mechanic :

ooh man this one easy for me.. get yourself the correct tools.

Danger_Davey :

Just let them know there’s going to be a training fee associated with you showing them how to replace their brakes. They usually leave you alone.

ApexMobileAutoworks :

If you’re replacing the rotors, just hammer the back of the rotor hard enough to stretch the bolt head, then it will spin right out. Hope it helps next time!

Hella Spice Co. :

Need the punch driver bro . I have to use it all the time when I take off the rotors in my wife’s Honda .

miclo :

I FEEL YOUR PAIN.. JUST WENT THROUGH THE SAME THING 😭😭😭😭🤣🤣🤣🤣🤣

Christian :

Heat and an impact driver

Sean cleary :

You did not put it back in

mafiozorek :

Drilling the bolt takes 3 minutes. Literally

financiallyconfused :

I’d rather swap transmissions that remove that screw if it’s stripped😂

wickster11 :

Those screws holding the caliper are useless drill it out and never use it again. Who ever invented that wasn’t planning on doing a brake job

Anthony J :

Take the drill off hammer

Angel Garcia :

There’s a tool for that

Dro :

Never use your inpact gun to remove those screws… Always use an impact driver…

mariomaldonadopulido :

They are weak screws

Aaron :

What happened to ur tools

Raiderstrongman124 :

good load just hit the back of rotor boom 🙄

Bumpy :

It's called an easy out literally. Tap it with the hammer and back it out

Mitchyy mitch :

You got the wrong bit fam

diallocorbin :

you and Oklahoma