AKG Farm & Hay
Region: US
Monday 15 September 2025 22:07:17 GMT
15268
216
51
10
Music
Download
Comments
Jordan Watson :
that adjustment is for the twine spacing. On my john deere 435 there's a rod that keeps the twine away from the edge. If it gets bent it will let the twine fall off the edge
2025-09-15 22:57:59
8
Natural State Grazier :
Left or right side? If left side as you’re sitting in the tractor then check the twine hook near the twine shear plate.
2025-09-16 01:18:20
1
cblevins323 :
Sounds like the twine guide is either bent or broke
2025-09-16 15:11:30
6
Jacob Dickerson :
There’s a arm that goes from the side where the chain is into the pickup area that keeps the twine off the edge. May have lost the pin and it fell out.
2025-09-16 02:40:18
6
dannybarnett632 :
Get a New Holland
2025-09-16 23:43:01
7
mr.sandefur24 :
Get on the monitor and bring the edge in that’s coming off
2025-09-15 23:19:40
8
Jonathan Parker :
Check your guides be sure they didn’t bend I put a longer bolt with washers to space it out on mine
2025-09-17 17:25:17
5
nicholaus taylor :
This is common with fall hay. Hay to short. Mine done same thing and I see it in wvery hay field around.
2025-09-17 00:17:02
6
mikebroce :
shorten all your middle belts by one inch.
2025-09-17 01:37:30
6
Jeremy Davis :
just get on you're screen and bring it back in another inch
2025-09-16 02:54:11
2
jlcrissman972 :
I’ve noticed that when the hay is too dry and slick, the string will slip off the bale.
2025-09-16 00:09:16
6
chrismcneil8 :
How are the belts tracking on that side
2025-09-15 22:27:34
1
user1205911011310 :
Adjuster on each side of baler by chains. Has a knob and adjustment slide. Manual stop to go with electronic controls. If those are set then you may have sensor issue.
2025-09-15 23:01:12
4
jerraldrekieta1 :
Spring broke on inside stop.
2025-09-16 05:04:54
1
Daniel :
I have a 458 Deere, mine was doing the same thing. Twine guide was bent.
2025-09-16 22:58:44
1
Chad Griffis :
I have problems with that on short really dry grass
2025-09-15 23:26:56
2
Noel Stubblefield :
it's the guide on the side
2025-09-16 16:02:00
1
jerraldrekieta1 :
4 ft wide has one spring. 5 ft has two one on both sides.
2025-09-16 05:06:25
1
GreenbeanX :
Some Jose’s have a small orifice so not as much fluid comes out . I bet u got full amount going to it . I dnt know but it could be .
2025-09-16 01:49:33
1
jerraldrekieta1 :
If you can’t find where the spring goes. Go to John Deere and tell them you need the twine spring and they can show you.
2025-09-16 05:10:47
1
chrissmoot81 :
Need to adjust your tie arms my did same thing. One bale was good and next one wasn’t. Had to adjust it on your monitor
2025-09-15 23:45:39
1
chrismcneil8 :
Possibly if the hay is dry and slick it will do that, straw, vasey and Johnson will do that this time of year
2025-09-15 22:30:33
1
jimgoad58 :
Adjust your arms and then after that, buy a Baler that has nut wrap
2025-09-16 00:48:42
1
Mark Smyers Jr :
Mine started this Thursday last week.
2025-09-15 22:53:22
1
SWAMP FOX HVAC :
man. I hate bailing
2025-09-15 23:09:58
1
To see more videos from user @akg_farm_and_hay, please go to the Tikwm
homepage.
