Carbon Fender Wrap Reuse | Porsche Cayenne GTS Front Extension In this tutorial, we demonstrate a smart and efficient wrap technique using leftover vinyl from your rear fender extension project to wrap the front fender extension on a white Porsche Cayenne GTS. This method saves material, maintains consistency, and delivers a cohesive carbon accent on both sides. 📋 Step‑by‑step process: 🧼 Clean the front fender extension thoroughly, including slots and tight gaps 📦 Use leftover vinyl from the rear wrap — align it to the front shape 🧷 Apply knifeless tape along the upper edge of the fender extension 🔥 Lightly heat the vinyl to stretch and shape it to the curvature 🖼 Position and apply the vinyl across the extension ✂️ Trim the upper edge via the knifeless tape 🔪 Cut the inner edge (near fender body) with a sharp blade using safe technique 🔥 Final heat gun pass to set edges and ensure strong adhesion 🌟 Why this technique works brilliantly: • Material savings — you reuse what’s already cut and available • Matching carbon theme between rear and front fenders • Clean, guided cutting with knifeless tape protects paint • Fully reversible — remove or change anytime • Enhances the sporty aesthetic on white body panels #Wrapping #VinylWrap #PorscheCayenne #CarbonAccent #AccentWrap - @polonezgarage