@angelsagent: Loading and strapping up a motorcycle on a flatbed. #vehiclerecovery #motorcycle #motorcycleride ##flatbed#v#vehicle

Brandon Robinson :

Finally someone who does it correctly! 🙌

Little_Tom :

I normally just lay it on its side and throw a strap over the seat

martinsanderson404 :

purpleryder :

way I do it 🤣🤣

N317 YTS :

gotta go forward, down and left/right off forks. never leave stand down. back wheel strap isn't always necessary but can't ever hurt. never go over or through any part of bike 👍

supratt3500 :

not the way i would do it but everybody has different ways and if they work with no secondary damage its job well done.

NEXUS Automotive :

ch05red :

i always put the front wheel against the winch so it’s touching then strap the front down on the forks so it compresses them but not a crazy amount and then 2 straps on the rear wheel or frame if it’s exposed depending on the back and never moves, only difficult one i find is vespa style scooters too many plastics 🫡

Alex Charman :

bike straps X4, top or the yokes NOT handlebars sown at 45 degrees to the bed pulls it down and forward 2 more straps back of bike on chassis down 45 degrees to bed pulls back down nd back, 2 normal straps through wheels as u dont, bike should stand upright wont move. dont leave on stand

Adam Farooq boxing :

a few people cable tie the brake to the handlebar aswell but yh v shape is the only logic

Lee :

2 straps from handle bars pulling down and forward and one through back wheel. Job done.

Mus :

Iv been strapping bikes, cars for years not once any issues

Stu :

Do not go mad ratcheting the wheels down if you do it will crack the alloy wheels or bend the forks

hsavoury :

haybar2020 :

you shouldn't leave the bike on its stand 😉.

D2 2 BOG :

That is not the correct way Hahahah 🤣🤣😭😭

M :

Even if the stand was up would still be wrong

Mick Arnold :

well thats wrong. you DO NOT strap a bike down on its stand

Travis :

🧐

Shaun Taylor :

id put it into gear aswell and tie the front brake leaver