Parker Jones
Region: US
Friday 24 October 2025 02:40:18 GMT
44804
6251
50
7
Music
Download
Comments
Ls.3_mike :
Buy a seal puller
2025-10-24 02:57:09
39
Ivan Parrigin :
The lion does not concern himself with gm automatic transmissions:
2025-10-24 13:05:49
19
Charles Worthen :
You need a seal puller
2025-10-24 12:46:24
0
Chet :
Drill a screw into the seal and pry the screw seal out
2025-10-24 12:25:55
6
Allchevyboy82 :
You need a seal puller, parts stores should have one, but if not I know harbor freight will.
2025-10-24 04:49:21
8
🛩hoosier_daddy302🛩 :
seal puller it's basically a hook that grabs on the inside through the center hole and with a quick pry she should pop right out
2025-10-24 13:28:00
6
irirogelio7 :
Take the tail housing out
2025-10-24 19:15:36
0
️quentin_boyd41 :
Self taper screws one on each side
2025-10-25 00:48:02
0
travisarnold256 :
rust prevention
2025-10-24 12:29:34
1
John Strathmann755 :
it may not just be the seal. check the yolk to make sure its not proved. It also could be the tail house bushing/bearing which could get worn from bad ujoints or driveshaft out of balance. If it still leaks, look into those options.Just any FYI. Also a good tip, keep your fingers on the rear UJoint caps so they dont pop off, hit the floor, and bearings go everywhere.
2025-10-24 12:46:21
0
BoostedSaabLife :
I always use a prybar
2025-10-24 10:49:29
0
milkywayinteriors :
Seal puller
2025-10-24 07:23:26
0
Noah🏎️ :
Stark isn’t sick Parker
2025-10-24 15:29:59
0
Julian Juarez-Villegas :
Did you ask jay how to do it? And do you have an air hammer?
2025-10-24 04:10:03
2
Hunter busby :
First
2025-10-24 02:50:23
0
William Halsey jr :
just pry out with screwdriver no hammer ever need to remove
2025-10-24 03:36:04
1
grilled chess :
4th👀
2025-10-24 02:49:47
1
that5.7hemi_ :
First
2025-10-24 02:44:49
1
Erik PAF :
U need a seal puller
2025-10-24 03:18:16
10
E :
Moxy vid
2025-10-24 04:48:16
0
Jake Bromstad :
Needs an nv4500
2025-10-24 03:15:03
0
️ :
Is it 4l80? It has to be a 4l80 with that motor as well add a 40k trans cooler
2025-10-24 05:36:23
0
Boostedlsx :
Make sure that back fitting is the long one or you will cook that trans in a few miles
2025-10-24 12:10:22
0
Ryder :
Anyone else see part of the cap from the u-joint break
2025-10-24 22:54:07
0
Realnativedatguy :
Manual swap💪💪💪
2025-10-24 02:53:00
0
To see more videos from user @stangryafterdark, please go to the Tikwm
homepage.
