@dylantellier: What do you thinks wrong with it? #d8k #caterpillar #barldranch #dylantellier #agriculture #alberta #trees #clearing #farmland

Dylan Tellier
Dylan Tellier
Open In TikTok:
Region: CA
Tuesday 25 November 2025 03:21:37 GMT
48964
1817
54
26

Music

Download

Comments

user262708288
user185988467730 :
It’s a dropped liner
2025-12-08 15:37:27
4
locallyhatedditchbaler
Luke Hansen :
That happens every year on the newer quadtracs after they sit through a freeze thaw they can get coolant in the oil not saying it’s your problem but it might not happen again right away
2026-01-24 02:48:48
1
seth_farms_ab
Jayden_Seth :
Likely a liner o-ring in my opinion
2025-11-25 03:29:06
31
randall8287
Randall :
Why would you put that coolant mixed with oil back in your rad
2025-11-26 17:30:46
4
themechanic710
Mark A. :
Maybe it’s an injector cup.. could drop a liner, but why does everybody think it dropped a liner?? Could be a cracked head.. oil cooler, contamination…?
2025-12-08 19:48:26
3
zackshearer1
zackshearer1 :
Unsure if you can pull the oil pan in chassis on older cats but I had a 3306 with a failed water pump mixing coolant into the engine oil, I’d also test the oil cooler in hot water while pressuring it, defiantly not common but they can fail that way as well
2025-11-28 00:21:44
3
keytonstrutz
Keyton :
Possible water pump? Not sure how they are designed on these older dozers but same thing happened to our CAT D6K2 this spring
2025-12-31 12:50:10
2
brent_ryz
Ryzo :
Liner O rings
2025-11-26 05:24:38
2
dig.bickin
Dig Bickin :
we call those "buckets" where I come from
2025-11-25 23:37:39
2
al.ffromtheplanetk
AL.FfromtheplanetKevisville :
See if the telltale hole on the water pump is plugged.
2025-12-01 18:38:52
3
rimfire_alberta2022
Hd :
Water pump shaft seal
2025-11-25 04:39:21
2
okpanhandler52
OkPanhandler52🚜 :
Can’t drive when it’s hot
2025-11-25 15:09:35
4
jjolynyk
Jjolynyk :
Very handy machines for pushing bush but jeeeeeesus they are money pits.
2025-11-25 05:12:43
2
paulr218
paulr218 :
Best bet would be to drop the front belly pan and drain the oil. Pull a side plate off the oil pan and confirm where it’s comes from before wasting time and money throwing parts at it. Plus this allows you to confirm the repair when done.
2026-01-02 02:27:27
1
yatkowsky
Lawson Yatkowsky :
Me after seeing red
2025-12-26 20:47:16
1
turbo338lap
Turbo :
Liner fits
2025-12-15 18:46:34
1
bobbyjoe198
bobbyjoe198🕷️🇨🇦 :
Oops 🙊
2025-11-30 19:47:59
1
rileyzps
Riley :
oil cooler
2025-11-26 02:22:48
1
barefootbanditcom
barefootbanditcom :
Exspesive fix
2025-11-25 06:01:30
1
millardt
Todd Millard :
Oh boy
2025-11-25 04:50:07
1
adrturcan
Turcan Farms and Mechanical :
If it got real hot good chance its head/headgasket. But maybe can luck out and it is just the water pump
2025-11-25 03:59:28
2
dixonyass262
silky smooth :
liner time
2025-11-25 13:36:31
1
gary12345676
G :
liner o rings m8ne did the same
2025-11-25 13:51:28
1
davidhoskins88
David Hoskins :
Just saw a guy working on an excavator and he pulled the valve cover off and found it was a freeze plug that had come out.
2025-11-25 23:42:11
1
To see more videos from user @dylantellier, please go to the Tikwm homepage.

Other Videos


About