drewpow
Region: US
Wednesday 24 December 2025 02:03:11 GMT
700690
81480
173
177
Music
Download
Comments
Marilyn Bugl :
Please no sliding door or arch in here 😂
2025-12-24 02:30:37
1456
Travis Polson :
you are going to end up with cracks over the window and doors. you never want your joints in those locations because to the stress the structure puts on those spots. those spots have a good bit of movement and will crack the drywall joints if they are in those spots. it might take a year ot two bit you will develop cracks there. in the future when installing drywall you always want to put a full sheet that spans across those locations. installing the drywall sideways helps span that area better eliminating those joints in that location.
2025-12-24 09:48:28
427
JosemariaRR :
Why drywall vertical and not horizontal?
2025-12-24 02:41:01
72
Payton :
Measure once, cuss twice is my motto 😂
2025-12-24 06:01:31
1373
Lummer :
Should shove some of that old insulation in the interior wall, will help cut out some noise
2025-12-25 06:27:05
84
Justfahgetaboutit :
Only thing I see wrong is you forgot to say “that ain’t going anywhere”
2025-12-24 02:36:36
228
motodanny100 :
I have no experience but I’ll leave a comment 🫡
2025-12-24 02:30:53
101
Kelly✨Grindle :
Measure once cut twice 😅😅🤣🤣
2025-12-24 02:34:09
118
Brofessor :
I’ve found running drywall horizontally is easier. Also Ive learned over the years is to try and not have a joint at the corners of doors or windows. They will forever crack, no matter how good you are.
2025-12-24 04:16:59
71
Kevin Freije :
Wouldn’t you want to insulate the interior walls as well? For noise?
2025-12-24 20:23:17
18
urhottrash3 :
always hang drywall horizontally. when you come across a window or door just put it across blocking it and cut out for the opening.
2025-12-25 23:06:36
14
EricaLeJeune :
My FIL always uses red lipstick. Rub it on the edges of the outlet box and line the sheet as it should. Press a bit where the box is and you have your measurement.
2025-12-24 02:57:59
58
callum kucher :
Great job, only pointer would be around windows and doors you don’t want to have joints around the corners, next time plan the layout of your sheets so that they either fully encompass your window or door, or land in the center of the opening. That way they won’t crack. Especially around the doors, the seams covered by the mud and tape will crack from the vibration of shutting the door.
2025-12-24 07:01:24
90
Blaine :
Hanging it is easy the mudding and taping is worse
2025-12-24 03:23:54
9
Jim :
I call it a Oscillating tool
2025-12-24 13:04:10
7
Shadley :
A tip I learned is you don’t want drywall seems directly on the studs left and right of windows and doors because they’re prone to cracking. Had it happen on a good night after priming all my walls.
2025-12-24 09:10:23
13
CallMeGamin :
First thing is don’t put a small piece above the window do that entire part with one piece and trim the window out
2025-12-24 19:52:30
2
MrTEXAS :
Put the old r11 insulation in you attic in areas you might need some more. Plus it’s a way to get rid of it
2025-12-24 20:03:23
32
Josh Bray :
You should have put that r11 in that interior wall, if it didn’t get to torn up from removing it from the exterior wall.
2025-12-24 06:05:08
16
dma :
You don’t put drywall seams up from the corners of windows or doors they’ll crack way easier, you overlap the top/bottoms
2025-12-24 04:48:08
9
bobwehadababyitsaboy :
if you put 2 pieces of drywall together at a corner like that (on door or window) it is more likely to crack fyi
2025-12-24 04:36:07
5
James Sachse :
I would have reused that old stuff in the interior wall you build for more insulation not necessary but better than tossing it in my opinion
2025-12-24 04:24:14
5
Stormy 👨👩👧👦 SAHM/THRIFT :
My dad did drywall for 30+years. he cuts out the electrical boxes once it's on the wall. He just tacks the sheet up, cuts, then screws it the rest of the way in.
2025-12-24 04:28:53
10
dr.love269 :
Just gotta mud and tape everything. lol definitely the part we hate about drywall
2025-12-24 02:55:49
9
roganbode :
So inspirational Drew
2025-12-24 02:28:47
5
To see more videos from user @drewpow, please go to the Tikwm
homepage.
