Tamara | TT Shop
Region: US
Friday 02 January 2026 15:18:06 GMT
31778
72
120
9
Music
Download
Comments
tinkerchad :
Not normal. Looks like you could have filament that needs to be dried, or a partial clog. Should not look like that at all. Ever.
2026-01-02 18:16:16
29
huh 🤔 :
you might need to print some supports
2026-01-07 12:54:56
1
shiroyama :
holy stringing Batman. that's not normal. check for a clog
2026-01-06 13:21:01
1
probler_solvem :
Wet filament
2026-01-05 20:35:48
5
moncheck1999 :
is this the first print you are using this filament for? to me, it looks like they retraction is either not enough or nozzle the temp is a little too hot for the filament.
2026-01-02 23:14:26
1
huffraw :
Glow in the dark filament is abrasive. If your nozzle isn’t hardened it’s probably trashed.
2026-01-06 02:57:20
2
t1kt0kb4ndit :
Mine did it also adjust the Z Hop💯
2026-01-06 18:24:35
1
Cliff :
No. I run glow much lower than standard PLA. 190 C. Lots of additives in that stuff that make it goopy
2026-01-06 04:48:28
3
NightThoughts :
To me it looks like maybe the wrong size filament for the nozzle. I made this mistake my first go around
2026-01-03 06:40:38
1
Michael Anthony :
Halloween spider webs oh Lord help us
2026-01-17 12:03:10
1
coop again :
You probably need to dry your filament and
2026-01-05 12:10:02
2
tarzanat2011 :
Get a Bambu I’ve had great results with mine with 15 and 16 hour prints
2026-01-05 16:51:57
1
Ryan Holcomb :
I had to set my nozzle at 200, play at 79 and z-axis to -2.00. I think the webbing is something with the nozzle or filament. the z-axis adjustments keeps it from being yeeted.
2026-01-16 19:13:12
1
captain b :
Yeah that’s not right. Either it’s not calibrated correctly or the tips broken.
2026-01-02 15:54:54
1
Grant Shirley :
you need a hardened steel nozzle to print glow in the dark filament even if it's only pla
2026-01-06 20:44:30
1
ThePrintedPetShop :
Wet filament
2026-01-06 13:20:24
1
Bair Attack :
Wet filament, maybe a retraction setting also look for in the same place as the retraction setting set it to move in a spiral that will also help reduce the webbing
2026-01-06 00:18:00
2
WeeeeJordie :
The Ender 3 V2 killed my taste for Ender. I now have the Bambu Labs P1S with no issues like this.
2026-01-05 20:00:17
1
DB :
I store my filliment in a tub with a bunch of those gel packs they come with. Never had issues!
2026-01-04 13:44:00
1
Gb :
It’s that’s glow in the dark adjust temp
2026-01-07 14:46:50
1
Justine :
You need to run a temp tower to see where a good spot is for the filament. Some stringing happens, but that’s some much you won’t even be able to clean it up.
2026-01-15 01:51:20
1
YouAre WhatYouEat :
No. not normal. Clean the head once it cools.. 👌 sorry for your bad luck. PS brim is never good in articulated prints... I imagine the head issue caused the yeets as well. cant be sure
2026-01-05 07:44:47
3
serobasu serobasi :
1. filament needs drying, look how to do it with your bed and a cardboard box. 2. run a temp tower so you know the correct temp to print at without stringing
2026-01-05 20:30:13
1
JK_Skorpion :
Not normal. Probably need to dry that filament and retraction and temp settings might need tweaking.
2026-01-04 14:34:38
2
To see more videos from user @tamara.ttshop, please go to the Tikwm
homepage.
