Kathryn Brown
Region: GB
Saturday 03 January 2026 18:27:37 GMT
145239
295
711
36
Music
Download
Comments
Dudecool :
the paint is supposed to connect to the wall via bluetooth.. you forgot to pair them
2026-01-04 12:30:45
208
why am I watching this :
People in the comments are clueless. You should have used Zinsser gardz once you sanded the wall back to seal any of the old residue. sanding alone is not enough. What you need to do now is scrape it back. Apply zinnser gardz and let it fully dry, overnight ideally. Then you can apply the topcoat. No need to dilute etc. obviously fill and sand before the top coat if you're going to bother. goodluck.
2026-01-04 14:23:05
14
rye withers :
What was on the wall before? (I was in the paint industry 10 years so I’ll try to help lol)
2026-01-03 22:16:34
0
;,,; 🥏 :
you do not PVA a wall before painting it's very bad
2026-01-04 12:56:44
29
Rachel :
Youve got to paint the wall with Watered down emulsion on a freshly plastered wall first x
2026-01-04 17:00:52
36
Anthony :
silk paint onto plastered wall is a no no. needs a mist coat first.
2026-01-04 13:21:49
156
user6315079700395 :
it's the pva. never use it. you should always apply the cheapest matt white paint to exposed plaster first and then use your colours over the matt white
2026-01-04 13:08:28
55
davelinford1485 :
too many of these tik tok diy disasters, and too many (tik tok expert painters) giving bad advice you need to speak with a decorator who has at least 25 yrs plus experience of dealing with theses issues
2026-01-04 12:15:58
8
C :
It’s the wall telling you you shouldnt paint it brown
2026-01-04 18:17:34
28
Emily Billi :
you don't PVA a wall ready for paint, you needed to mist coat it
2026-01-04 10:45:39
35
FluorineSilver :
its just a dusty wall. you forgot the primer
2026-01-04 13:01:05
5
deanfoster81 :
23yrs been a decorator. Wash wall down with warm water and make sure you scrape all the glue and paste off, let it dry fully and give it a sand with course sandpaper next get some white Matt emulsion water it down abit about 75% paint to 25% water and paint the wall. Once dry give it a quick flick over with some medium sandpaper, dust off then two coats of your colour you want. 🤘
2026-01-05 20:09:34
9
That Will :
All you did wrong after removing wallpaper wash the wall with sugar soap which removes the old paste, that is why this has happened no need for any sealer sugar soap is cheap just mix with warm water use sponge do it 2 times to make sure
2026-01-04 17:22:26
6
al_star16 :
did you use valspar paint by any chance
2026-01-07 11:18:01
1
MOW2840 :
Looks like Greenland 🇬🇱
2026-01-05 17:18:28
0
Wizziwoo :
Who told you to use pva? Nope!
2026-01-04 22:27:35
2
golf par :
you haven't done anything wrong.it was the others who did it nine the first place
2026-01-04 15:12:35
0
Shelly :
is that latex paint?
2026-01-03 22:16:01
5
avinagiraffe :
Pva is a bad idea always does this it’s like a rubber coating
2026-01-04 12:03:19
8
SPURRYY :
you need to use Zinsser Gardz or Peel Stop
2026-01-04 19:24:35
2
PokaFace :
The wall still has moisture also needs a base coat before the main application
2026-01-04 20:53:37
1
karldawes :
50/50 water and Matt emulsion to seal the plaster Sand down then Vinyl Silk or eggshell. If that's your preferred finish
2026-01-04 16:59:57
1
Tanny :
Peel back the old pain, get a bucket of matt paint do a 85 15 water mix
2026-01-04 16:18:19
0
TM Decor Glasgow :
pva isn't for painting
2026-01-04 13:53:15
1
bigfletchlives :
why did you put pva on before painting. you don't need the place at all.
2026-01-05 00:50:51
1
To see more videos from user @kathrynannebrown, please go to the Tikwm
homepage.
