Royaltyautoservice
Region: US
Monday 05 January 2026 20:29:15 GMT
52343
3925
62
30
Music
Download
Comments
Jeff :
That’s called an add-a-fuse and caused no issue. It was installed improperly and that’s the cause of the failure. Dealerships and mechanics always look for aftermarket accessories to void warranties and to blame faults on.
2026-01-05 20:55:51
20
Trevor :
Love watching the in-depth explanations.
2026-01-05 20:35:42
27
clint c :
I don't put nothing on my vehicles that it didn't come wit. then if I do I don't get my shyt from like autozone or is auto parts store. I get factory
2026-01-09 22:55:30
1
Saltydog711 :
Those piggy back fuses are junk. I ordered some lights with that and sent it back. Not chancing that
2026-01-05 23:32:25
2
Michael Plant :
"Taking power from components" isn't what's happening. You're connecting to the fuse box busbar in parallel. Provided the fuse holder was installed properly there's no difference between doing what they did and doing what you're suggesting
2026-01-05 21:35:53
2
UNITATO :
Who hooks lights to a radiator fan fuse???
2026-01-06 00:47:12
13
Corbin :
this is why I like upfiiter switches
2026-01-05 21:41:12
9
Brian Valenzuela :
The other problem is, the power supply to that 10a fuse may not be rated for 20a.
2026-01-05 23:40:25
9
Dani Fiona (she/Her) :
What a cheesy connection modification
2026-01-05 21:39:01
2
Chris :
ive used those for years on many vehicles. Never an issue. But you need to know what your plugging into. Like if its constant or switched power.
2026-01-06 01:07:07
5
Mrjexer :
They come with 4 powered and fused dip switches already from factory for this very reason! With the wiring already ran into the engine bay!
2026-01-06 04:46:14
1
Fat To Fit :
damn lights always causing problems! 😂 I understand what you're saying though, gotta be careful.
2026-02-19 21:14:18
2
Monogram :
I think you’d be better off building your own circuit off the battery.
2026-02-16 14:37:52
3
GraPeFlAv0rEdw1nd0ws :
Needs a switch pros setup
2026-01-06 00:59:07
1
Dennis :
truck may have upfitter switches to hook up too
2026-01-06 00:19:53
1
tyler smith :
you said it they make inline fuses
2026-01-06 01:05:04
1
user7757117301508 :
what are your thoughts on oil catch cans
2026-01-06 01:30:06
1
clint c :
A lot of times after market parts will fck your vehicle up in the long run. if not right then
2026-01-09 22:56:59
1
Charles. :
Ask your dad to give his opinion on Oil Catch Cans for a 5.0 New Ford Truck.
2026-01-05 21:42:09
2
Patrick Something 2.0 :
You can always find it unused, constant, or ignition switched terminal on every vehicle. I never use those fuse taps.
2026-01-05 23:22:37
1
Mike Arnold440 :
Just an fyi those are only rated for a 10amp original fuse with a 5amp add on fuse so he would need that to activate a relay
2026-01-09 09:45:41
0
Ok then :
I have something similar in my Tundra. I would have preferred to use an empty maxifuse but none were key power
2026-01-25 14:36:44
1
🚗 Semper Fidelis Detailing :
This is becoming my favorite channel
2026-03-12 18:47:44
1
Feral Cypher :
not the part makers fault. the part wasn't properly installed.
2026-04-01 20:54:30
1
custominteriorspecialty :
That fuse tap should only be used if it’s being used to trigger a relay, the main power for the relay should be taken direct from the battery,
2026-01-05 21:02:55
1
To see more videos from user @royaltyautoservice, please go to the Tikwm
homepage.
