Super Dwarf
Region: US
Monday 12 January 2026 20:01:51 GMT
44137
2455
47
9
Music
Download
Comments
Damon Morris :
are you 100% sure it isn’t a vp issue? My truck had a similar issue. ended up being a bad vp
2026-01-13 17:05:38
1
Lee Artrip :
If you have your airdog plumbed to a constant key on ignition source, the vp44 is being overloaded with fuel pressure trying to start. Factory plug in runs only until pressure is made and shuts off, as soon as you crank pressure drops and the pump turns back on but there’s enough drop in feed pressure with the pump off they start fine. Try unplugging your airdog, start it and then plug it back in once it’s starts.
2026-01-13 03:46:51
0
Jesse Baker :
I’ve seen a fass system put to much pressure causing a hard start like that
2026-01-13 17:19:02
1
Diesel dale :
Been there. Injector crossover tube o ring on cylinder 6 was letting it leak by.
2026-01-13 03:49:15
1
Chris :
not everything has been a complete waste of time.....spending quality time with your mechanic is never a waste of time.
2026-01-13 01:02:53
13
forged_2g :
Overflow valve on vp. It’s in the return line. Put a new one in and see if that fixes it.
2026-01-13 07:17:56
0
Fishing with Chris 🎣 :
If it cranks up, no problem the next day it should be fixed, right?
2026-01-13 09:55:52
0
LoneWolf :
Hopefully it just needed another good prime and you're good now. I guess ill have to wait to see. 😆
2026-01-12 20:43:45
4
BrOklahoma :
Running into the same issue on my 89. I replaced the fuel feed like and a stop having issues. Fuel pressure looks good through idle to driving. I’m assuming it was a hole in the return line all along lol
2026-01-13 03:35:56
2
Kadin6.0 :
I had this problem with my 3rd gen and it was the injectors they were bleeding pressure had to change all 6 then it started with the first turn
2026-01-13 05:22:23
3
wolfjflywheel5.9 :
Ain’t got no gas in it. Mhmm
2026-01-13 03:12:51
3
daultongreven :
Haha brother at least you’re staying consistent 💪🏼 I’m proud of ya
2026-01-13 13:36:22
1
JC :
which check valve are you using?
2026-01-13 04:42:28
0
Robert Kopp :
I had that problem recently with bad crank sensor
2026-02-15 03:06:00
0
208 Adventures :
I had an issue like this once with my fass. I was using wix filters on it. I switched back to fass filters and never had an issue again 🤷🏼♂️prob not your issue tho
2026-01-12 22:00:46
3
cgschrepel1234 :
my duramax was having the same issues I put a fass pump on and fixed it
2026-02-20 19:40:57
0
Neil Tibbs :
👍
2026-01-24 20:21:52
1
mohamedakeel948 :
🥰🥰🥰
2026-01-20 17:02:55
0
user874441 :
😂😂😂😇
2026-01-25 21:14:19
0
jdawg :
😂😂😂
2026-01-18 04:44:01
0
Koen :
Try your return line coming off the back of head and VP. Its a steel line. Replace with stainless braided 6an hose.
2026-01-14 00:25:32
2
Average Joe Builds :
dabs were involved in the explanation time between you and camera man i bet 😂
2026-01-13 03:45:44
2
Diesel Guy :
That air leak is whooping your ass 🤔
2026-01-13 04:28:06
2
Jake Logsdon :
You got this bro! Sleep on it. 👍🏻
2026-01-13 00:55:51
1
To see more videos from user @superdwarf_, please go to the Tikwm
homepage.
