@artem_pankovich: One-Piece Hub Bearing Explained - VW T6. • In this video, we replace the rear wheel hub bearing on a Volkswagen T6. This model uses a specific bearing design where the hub bearing and retaining ring are integrated into a single unit. Because of this construction, the bearing must be removed and installed as one piece, which requires the correct tools and procedure. • To perform the replacement properly, we use a dedicated special tool with adapter rings, allowing the bearing to be pressed out of the housing together with the retaining ring, and then pressed back in safely and accurately. The entire process is clearly demonstrated step by step. • This bearing design is also found on Volkswagen T5, T6, and some passenger cars within the VAG group. The main difference lies in the bearing diameter and corresponding adapters. In this case, the bearing diameter is 85 mm, and the tool set used is model-specific - it cannot be used for other bearing sizes. This video is a practical guide for mechanics and VW owners who want to understand this hub bearing design and replacement process. • #supermechanik #artempankovich #LernenMitTikTok #goldenhandsmechanic #Autos

Fuck Tiktok :

what you have for ball joints on w211 ? that C press is 💩

angelorum2 :

Seeee come no,il server sta dietro e davanti non esce

Majon :

das lohnt sich heutzutage gar nicht mehr, kannst es schon komplett kaufen ist günstiger

Öcsi :

[email protected] :

Nikel 🤔

vasia kelm :

Так то оно так только не на всех это авто работает.

aleelani :

perfetto

eddy_02 :

Обалдеть, Молоток Артём ✌🏻✌🏻💪👍👌

bopi77 :

Good job👍

Johannes :

где можно купить 👍👍

180924609 :

Estupendo!!!

Antonio Herrera4387 :

buen trabajo

. :

como se llama es herramienta alguien me punde decir y en donde la consigo

Birman :

здрастуйте, как этот набор называется

Victor :

Bravo 👍🏻👍🏻

q :

👍thankyou

R.S. :

чуть не понял, а стопорное кольцо которое внутри как снять?

andrej :

добрый день где такой набор брали

Karol Grabowski :

ile kosztuje 👍

_nadir_64 :

бабический👍👍

carbax68 :

Strange, usualy there are circlips on booth sides bearing house. 😳

Animas :

nicely done..

zox75 :

Bravo majstore

kamil640dx :

Part number

jurecs12latgola :

сказечники😂