@vossgarage: What’s the best approach to getting this front axle back into the 2nd gen?! #2ndgencummins #24vcummins #DIY #dieseltruck #trucksontiktok

Mason Simmons :

I would 2wd swap it that way you don’t have to mess with any of that stuff. Plus weight reduction. Wayyy easier

alex :

killin it sir

ivan_silva_tx :

What exactly paint did you use for that 2 g

ben24v :

I pulled mine last night. Took 90 minutes

Luke :

That’s probably the way I would do it

Quinton Boone :

That’s a wise plan. Only other idea I’d have is something under the pinion to adjust the angle. Looks heavy!

Old Smokey :

What disc brake setup is that

Chase5.9 :

Do you have a YouTube channel showing what you did through the whole build

ColeEthington :

Eric :

You’ve got it about figured out the same as I had. I’ll cart the axle under by just using one jack just to the left of the pumpkin, jack it up and put bolts in the upper control arms, then use a 2nd jack to tilt the pinion up and get the lowers in. Sometimes I’ll use 1 or 2 ratchet straps to help locate the axle left-right, just tighten one and it’ll pull the axle that direction