@kdexcavationco: Draft pin replacement on my ole 333g skidsteer typical problem if you don’t keep the bolt tight. I figured it broke they always do. When it starts pushing grease back out around the head of the bolt pop that grease cap off and give it a good tighten. Or just replace this for about 260 bucks 🤦‍♂️ I batter the threads too so it won’t back off then couple spot welds on the cap to make sure it don’t come off. The seal was still decent this time so i didn’t replace it. It’s a great wearable pin design but the serviceability sucks as far as keeping it tight. That’s the only flaw grease em every day for longevity 3300 hrs on this machine very minimal wear #foryoupage #makindirtylookgood #SmallBusiness #mechanic #excavator

Adam D Midkiff (Poppy D.)

Open In TikTok:

Region: US

Sunday 08 February 2026 13:38:55 GMT