Bruce Wilson
Region: US
Saturday 14 February 2026 14:26:30 GMT
100774
1458
48
76
Music
Download
Comments
Luc8T :
In Norway, and i think most of Europe also, there is a safety valv for this kinda situation, so the only oil it the amount in the actual hose, not the sylinder
2026-02-14 15:35:17
47
Johan Möller :
In the civilized world we have laws against constructing dangerous hydraulic systems like this. Hoses are not alowed to be load holding. At that point pipes are recuired. With load holding valves ofcourse. But US trucks are still the same as in the 80s, so no surprise really.
2026-02-15 11:49:31
14
trevor ❌️ :
if u blew hose why is the box not coming down if the cylinder is releasing fluid
2026-02-22 20:41:13
0
James Clark :
In this video all he had to do is disengage the pto and it would have saved the oil in the tank.
2026-02-17 17:14:48
4
Trucker221 :
he's lucky he was empty because that trailer will slam down if loaded had that happen to me
2026-02-16 23:25:17
1
Enduro life 🇫🇷🇨🇦🇻🇪 :
Once again , in Europe , there’s a safety valve at the trailer ( or any equipment using hydraulic pressure) and lock the hoist in the position for safety
2026-02-15 03:09:25
3
Rekenhavoc :
switch off pto and drop bed to minimize loss
2026-02-16 21:28:29
6
breedingexotics :
Yeah , right bro I could grab that leak with my bare hand and get it to stop
2026-02-18 18:47:53
2
jonoo :
Nobody calls it that.
2026-02-15 06:19:12
6
salquinones1 :
Or just lower it asap… 🤷🏻♂️
2026-02-16 15:35:24
2
sam the man :
That’s called blowing a load
2026-02-14 15:42:19
2
Tim Wilson :
if you blew a hose how is the bed still up
2026-02-16 21:03:22
1
bigredv8 :
just let that tipper down. Like you usually would. Tipper down. Oil Stops.
2026-02-14 15:57:23
2
OG Ronnie B :
I had that happen once!
2026-02-18 01:57:06
1
🇪🇪MargusV :
No safety valves?
2026-02-15 09:36:03
2
Bruce Bartlett :
pain too repair
2026-02-17 06:40:51
1
paolorossi :
Yes , only installed hoses and the driver should have seen the rubbing of the hoses
2026-02-14 17:11:43
1
Screw.loose01 :
Oops
2026-02-15 18:22:45
1
Chad Bennett :
Why not drop trailer and save some oil.
2026-02-15 18:05:52
1
kevin Chappel :
Years ago, my dad had one where the cylinder broke on the way back down, bent the trailer, framing, half bent the truck frame sprayed hydraulic fluid all over his back window, so it couldn’t see anything. He almost died. The whole rig tipped on over.
2026-02-14 17:27:43
1
Rich Heffner :
I had the tank blow open because the vent was clogged. dropped all the oil in an instant.
2026-02-17 14:55:36
0
Swade405 :
soul glo
2026-03-01 00:52:05
0
funeralpartymc :
here's what we call somebody didn't replace the check valve last time they worked on the hydraulic hoses serving the cylinder 🤷♂️
2026-02-25 01:25:39
0
jens :
why no breakaway?
2026-02-26 19:05:21
0
Daniel Elston :
How about disengage the PTO?
2026-02-16 21:58:44
0
To see more videos from user @bigrigbruce, please go to the Tikwm
homepage.
