katiesliltruck
Region: US
Friday 20 February 2026 23:53:38 GMT
173643
17842
320
196
Music
Download
Comments
luisesteba12 :
Dam those are big bulbs 😩
2026-02-21 04:37:15
580
Geo🐻 :
LEDs use less power than regular bulbs, so the car gets confused and thinks it’s blown
2026-02-21 00:10:29
353
Cessar :
You have to cut and flip the wires. The led has different polarity.
2026-02-21 03:30:02
51
Mango 🇵🇷 :
you need a resistor since your wiring set up is meant to use incandescent. until then it wont work.
2026-02-22 12:14:38
10
teddy britz :
I added one on mine and it works. you have a junk bulb or something.
2026-02-21 14:59:38
7
🏀🏆WILL🏆🏀 :
Upgrading the 1996 Chevy Silverado under-hood light to LED involves replacing the factory 1156 incandescent bulb with a 6000K LED bulb, or replacing the entire housing with a modern 3W-5W LED assembly
2026-02-22 09:51:34
5
Phil :
have you considered that the bulb is no good?
2026-02-21 19:41:02
5
canipet_thatdog :
You need to flip the polarity in the wires
2026-02-22 00:14:05
9
Blank :
If it ain't broke...don't fix it!
2026-02-21 19:54:34
5
Misterxman223 :
It might need resistance to make the bulb work
2026-02-22 02:51:18
6
Coach Kurtz :
It's a cheap bulb and doesnt habe the proper resistance
2026-02-23 05:09:48
7
Roberto Gonzalez :
What bulb is she talking about ! 😁
2026-02-21 03:56:53
5
Redbird :
probably got a bad bulb it happens some times
2026-02-22 03:43:55
5
rayray7844 :
Get the right bulb
2026-02-21 00:50:15
5
Ashton Schaefer :
I think your combobulators busted
2026-02-21 00:31:46
6
Ishmuhhyell :
You to switch the terminal on it
2026-02-21 03:04:15
5
Sargeman24 :
Bad bulb
2026-02-21 00:48:02
6
user2562157352990wsisneros :
You might have a bad bulb take it back and get another one
2026-02-22 00:35:22
7
Sleezy :
Resistor
2026-03-02 18:00:41
5
Simon Englody :
been there done this gm wired those backwards so the center terminal was ground and the outside was positive had to swap the terminals around in the plug to make it work
2026-02-22 04:39:48
6
Alvaro Uriel Ibarra hrdz :
Have you tried that bulb somewhere else? Just to make sure it’s a good one
2026-02-21 02:10:27
6
Elias JR :
This gon sound like sum bs but they do use less power so you’ll need to wire in a resistor to restrict all the power so LED lights up
2026-02-21 02:34:12
101
dannyf.11 :
Hey it might be a burnt fuse
2026-02-21 04:38:20
6
Ruben Fxlrscrew :
installing load resistors CANbus/Error Codes: Trucks often check for resistance to see if a bulb is burned out. Because LEDs draw less power, the truck thinks they are broken and cuts power. You may need LEDs with built-in resistors or add a separate resistor.
2026-02-21 17:19:34
10
WrenchinDiesel :
Resistor
2026-04-14 02:34:15
6
To see more videos from user @katiesliltruck, please go to the Tikwm
homepage.
