@mymobilemechanic978: 👉 At his is why mechanics hate engineers? #fyp #lowell #automotive #massachusetts

michaelcortez867 :

chose another jack point

Garron Bowen :

Just get a normal Allen wrench

Daniel Robinson :

Put the jack on the frame and not under the spring then it will fit.

Justin_m_gendron :

If you didn’t compress suspension with the jack it would hang low enough to easily get top one

soupsactual :

That’s not a engineer issue it’s a skill and or tool issue

rey76 :

turn the steering

bryanscheetz532 :

couldn't you just turn the wheel

Dusters1998 :

Why not use an Allen wrench instead

Vegas Jay-One :

😂 His Gloves 🧤

Chris Mancini856 :

take out the bottom bolt and tilt the calipers up and slide it right out you dont even have to take the top pin out

kirksmodandrepairkmr :

Is this for real? If you’re changing the rotor you just unbolt the bracket and caliper together. If you’re just doing pads you only need to remove the lower pin. Why are you making this harder than it needs to be?

Robert Allaire :

I remember my first day

Noah Johnson :

Just use an Allen key??? So confused why this makes anything harder you don’t need a socket 💀💀

17Subs :

user46000633695547 :

Set the jack properly

logann :

John Dellago :

ball end allen sockets exist for a reason.

johnhymer1971 :

turn steering wheel to the right

bobbybgood71 :

you loosen the bottom then you just pull the caliper up and twist it out you don't even have to take that boat out

Michael Kostnicki :

how about a regular allen key

Robert Crossman :

turn steer wheel. lower out. swing caliper up. wow

yooooooo :

Or hear me out use a wobble extension….

El Cheliz :

use an Allan wrench.

Leonardo Hernandez :

I was gonna say cut an allen wrench and use a wrench but common sense the bolt’s first going to hit the leaf spring😭

Just saying :

Or you could use the old style Allen wrench like I’ve done for years